D-Link DIR-825 User Manual page 89

DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh
Gigabit Router with 3G/LTE Support and USB Port
User Manual
Figure 73. The page for creating a new PPPoE connection. The IPv4 section.
Parameter
Obtain DNS server
addresses
automatically
Primary DNS /
Secondary DNS
When all needed settings are configured, click the APPLY button. In the simplified mode, after
clicking the button, the window for creating an additional connection opens.
If your ISP offers access to local services (e.g. audio and video resources), click the CREATE
CONNECTION button. On the page displayed, specify the parameters for the connection of the
Dynamic IPv4 or Static IPv4 type and click the APPLY button.
If you do not need to create an additional connection, click the SKIP button. In this case, the
Settings / Internet / WAN page opens.
IPv4
Move the switch to the right to configure automatic assignment of
DNS server addresses. Upon that the Primary DNS and
Secondary DNS fields are not available for editing.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Page 89 of 244
Configuring via Web-based Interface
Description