Management; System Time - D-Link DIR-825 User Manual
Ac1200 wave 2 mu-mimo wi-fi easymesh gigabit router with 3g/lte support and usb port
Hide thumbs
Also See for DIR-825:
- User manual (249 pages) ,
- Quick installation manual (61 pages) ,
- Configuring (20 pages)
Table of Contents
Advertisement
DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh
Gigabit Router with 3G/LTE Support and USB Port
User Manual
Management
System Time
On the Management / System Time page, you can manually set the time and date of the router
or configure automatic synchronization of the system time with a time server on the Internet.
To set the system time manually, follow the next steps:
1. Move the Enable NTP switch to the left.
2. In the Time Settings section, specify needed values. To specify the time set up your PC or
portable device, click the SET LOCAL TIME button.
3. Click the APPLY button. The System date and System Time fields will be filled in
automatically.
To enable automatic synchronization with a time server, follow the next steps:
1. Move the Enable NTP switch to the right.
2. Specify the needed NTP server or leave the value specified by default in the NTP Servers
section. If you need to specify several servers, click the ADD SERVER button.
Figure 165. The Management / System Time page.
Page 209 of 244
Configuring via Web-based Interface
Advertisement
Table of Contents
