D-Link DIR-825 User Manual page 115

DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh
Gigabit Router with 3G/LTE Support and USB Port
User Manual
In the Basic Settings section, the following parameters are available:
Parameter
Enable Wireless
Wireless mode
Select channel
automatically
Enable additional
channels
Channel
Enable periodic
scanning
To enable Wi-Fi connection, move the switch to the right.
To disable Wi-Fi connection, move the switch to the left.
To enable/disable Wi-Fi connection on a schedule, click the Set
schedule button (
new schedule (see the
existing one. Existing schedules are displayed in the Interval of
execution drop-down list in the simplified mode.
To enable Wi-Fi connection at the time specified in the schedule
and disable it at the other time, select the Enable wireless
connection value from the Action drop-down list and click the
SAVE button.
To disable Wi-Fi connection at the time specified in the schedule
and enable it at the other time, select the Disable wireless
connection value from the Action drop-down list and click the
SAVE button.
To change or delete the schedule, click the Edit schedule
button ( ). In the opened window, change the parameters and
click the SAVE button or click the DELETE FROM
SCHEDULE button.
Operating mode of the wireless network of the router. This
parameter defines standards of the devices that will be able to use
your wireless network. Select a value from the drop-down list.
Move the switch to the right to let the router itself choose the
channel with the least interference.
If the switch is moved to the left, the device automatically selects
one of available standard channels. To use additional channels
(the 12th and 13th – in the 2.4 GHz band, the 100th and higher –
in the 5 GHz band), move the switch to the right.
The wireless channel number. Left-click to open the window for
selecting a channel (the action is available, when the Select
channel automatically switch is moved to the left).
Move the switch to the right to let the router search for a free
channel in certain periods of time. When the switch is moved to
the right, the Scanning period field is available for editing.
Page 115 of 244
Configuring via Web-based Interface
Description
). In the opened window, you can create a
Schedule section, page 225) or use the