Draining The Spa; Cleaning The Spa; Hydrojet Pro; Hydrojet - Bestway SaluSpa Owner's Manual

Draining the Spa

NOTE: Drawings for illustration purposes only. May not reflect actual product. Not to scale.
1.
6.
10.
Only for Hydro-Jet Pro
Detergent residues and dissolved solids from bathing suits and chemicals may build

Cleaning the spa

up on the spa walls. Use soap and water to clean the walls and rinse thoroughly.
NOTE: DO NOT use hard brushes or abrasive cleaners.
DEFLATION
P61726

HYDROJET PRO

HYDROJET

Spa Repair
For Spa inflatable cover
If the spa is torn or punctured, use the provided
heavy-duty repair patch.
1. Clean area to be repaired.
2. Carefully peel patch.
3. Press patch over area to be repaired.
4. Wait 30 minutes before inflation.
2.
7.
11.
NOTE: Dry the SPA pool
(only for Hydro-Jet Pro)
P61725
P61726
P61725
3. 4.
Only for Hydro-Jet Pro
P6611
8.
NOTE: Lift up the spa
when there is only a little
water left. Damages to the
handles are not covered
under the warranty.
12. 13.
P61725
Cover
For Spa Liner
If the spa is torn or punctured, use the provided PVC repair patch and glue (not included)
following these steps:
1. Clean and dry the area to be repaired.
2. Cut the provided PVC patch to appropriate size.
3. Use glue (not included) to coat the one side of the newly cut patch. Make sure the glue is
evenly distributed.
4. Wait for 30 seconds and then place the cut patch with glue over the damaged area.
5. Smooth out any bubbles of air that may be trapped underneath, and press firmly for two
minutes.
6. Wait 30 minutes before inflation.
7. The product is once again ready for use. Repeat this process should further leaks occur.
10
5.
P61813
9.
NOTE: Twist and pull out the
Jet Nozzle, and turn the spa
upside down to dry the water
pipe.
NOTE: Dry the SPA pump (only for Hydro-Jet Pro)
2.
P61727
2
S-S-005136