Advertisement
SALUSPA
®
OWNER'S MANUAL
Please visit
BestwayUSA.com
WE SUGGEST NOT TO RETURN
THE PRODUCT TO THE STORE
QUESTIONS? PROBLEMS?
MISSING PARTS?
For FAQ, Manuals, Videos Or
Spare Parts, Please Visit
bestwayusa.com/support
©2024 Bestway Inflatables & Material Corp. All rights reserved.
Trademarks used in some countries under license from / Manufactured by Bestway Inflatables & Material Corp.,
No. 208 Jin Yuan Wu Road, Shanghai, 201812, China (Tel: +86 21 69135588).
Represented in North America by Bestway (USA) Inc., 3435 S. McQueen Road, Chandler, AZ 85286, United States of America.
www.bestwayusa.com
Advertisement
Table of Contents
Related Manuals for Bestway SALUSPA S100105
Summary of Contents for Bestway SALUSPA S100105
- Page 1 Trademarks used in some countries under license from / Manufactured by Bestway Inflatables & Material Corp., No. 208 Jin Yuan Wu Road, Shanghai, 201812, China (Tel: +86 21 69135588). Represented in North America by Bestway (USA) Inc., 3435 S. McQueen Road, Chandler, AZ 85286, United States of America. www.bestwayusa.com...
-
Page 2: Table Of Contents
• For the installation instructions, refer to the illustration steps on the package. Drawings are for illustration purposes only. May not reflect actual product. Not to scale. • Bestway will not be responsible for any damage caused to the hot tub due to mishandling or failure to follow these instructions. -
Page 3: Safety Information
SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS READ, FOLLOW AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS. Carefully read and follow all information in this user manual before installing and using the spa. These warnings, instructions and safety guidelines address some common risks of water recreation, but they cannot cover all risks and dangers in all cases. - Page 4 SAFETY INFORMATION DANGER: Risk of Electric Shock. Do not permit any electric appliance, such as a light, telephone, radio, or television, within 5 feet (1.5 m) of a spa. DANGER: Risk of injury. a) Replace damaged cord immediately. b) Do not bury cord. c) Connect to a grounded, grounding type receptacle only.
- Page 5 1. Take out the warning label from the accessory kit. 2. Carefully peel the warning label. 3. Affix the warning label in an appropriate location. 4. To order a replacement warning label, please contact your local Bestway After Sales Service. WATER TEMPERATURE INFORMATION...
- Page 6 SAFETY INFORMATION SUCTION OUTLET FITTINGS When installing and using this equipment, basic safety precautions shall always be followed, including the following: • Any modification that increases the flow rate of the circulation system shall require re-evaluation of the cover/grate and sump to ensure that the flow rating of the Suction Outlet Fitting Assembly (SOFA) is not exceeded.
- Page 7 (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party – U.S. Contact Information Company: Bestway (USA) Inc. Address: 3435 S. McQueen Road, Chandler, AZ 85286, United States of America Telephone or internet...
- Page 8 Limited by local law regulations, version for North America does not have region selection option. ANSI/APSP/ICC-16 SOFA STANDARD Installation Information label (Copy) Manufacturers name: Bestway (Nantong) Recreation Corp. Cover part number: S01 Life expectancy: 3 Years Cover flow rating: 20 GPM...
-
Page 9: Product Description
PRODUCT DESCRIPTION HOT TUB HEATER SPECIFICATIONS: Power Rate 110-120V AC, 60Hz, 12A PARTS & TOOLS NEEDED Compare the parts in your box to the parts listed on the top of the package. Verify that the equipment components represent the model that you had intended to purchase. If any parts are damaged or missing at the time of purchase, visit our website bestwayusa.com/support. - Page 10 SETUP INSTRUCTIONS • To minimize these effects in an indoor environment, provide plenty of ventilation to the selected area. Consult an expert to confirm the installation area is properly ventilated prior to use. • To avoid home or property damage, only install the hot tub in an area with an adequate drainage system.
-
Page 11: Usage Instructions
USAGE INSTRUCTIONS CONTROL PANEL AIRJET WITH WI-FI AIRJET ON/OFF BUTTON: After activating the GFCI, press and hold the button for 2 seconds. button will light up green and the control panel can now be used. Press and hold the button for 2 seconds to turn off all activated functions. CELSIUS/FAHRENHEIT TOGGLE: The temperature can be displayed in either Fahrenheit or Celsius. - Page 12 USAGE INSTRUCTIONS MASSAGE SYSTEM BUTTON: Press the button to activate the massage system, which has a 30-minute auto-shutoff feature. The light of the button becomes red when activated. Do not run the massage system when the cover is attached. Air can accumulate inside the hot tub and cause irreparable damage to the cover.
-
Page 13: Maintenance Instructions
USAGE INSTRUCTIONS HEATING TIMES For the water to reach 104°F (40°C), the time required is based on the starting water temperature and outdoor temperature. The data below is purely for reference. To display the current water temperature, run the filter system for at least a minute. Outdoor Temperature Water Temperature Set Temperature... - Page 14 MAINTENANCE INSTRUCTIONS Chemical Tablets (Not Included): • Remove the chemical dispenser from the hot tub when the hot tub is in use. • After performing chemical maintenance and before using the hot tub, use a test kit (not included) to test the water chemistry.
-
Page 15: Disassembly & Storage Instructions
DISASSEMBLY & STORAGE INSTRUCTIONS DRAINING To drain the hot tub, follow the drawings. Drawings are for illustration purposes only. May not reflect actual product. Not to scale. - Page 16 DISASSEMBLY & STORAGE INSTRUCTIONS DRYING RESET RESET RESET TEST TEST TEST RESET TEST • To dry the different parts of the hot tub, follow the drawings. Drawings are for illustration purposes only. May not reflect actual product. Not to scale. •...
- Page 17 DISASSEMBLY & STORAGE INSTRUCTIONS Detergent residue and dissolved solids from bathing suits and chemicals may build up on the hot tub walls. Use soap and water to clean the walls and rinse thoroughly. Do not use hard brushes or abrasive cleaners. DEFLATING The following is NOT applicable to ThermaCore™...
-
Page 18: Troubleshooting
DISASSEMBLY & STORAGE INSTRUCTIONS REPAIRING When repairing the cover or interior floor: Use the provided repair patch to repair tears or punctures. • Clean the area, and carefully peel the patch. • Stick the patch over the damaged area. • Wait 30 seconds before re-inflation. When repairing the walls or exterior floor: Use the provided repair patch and glue (not included) to repair tears or punctures. - Page 19 TROUBLESHOOTING Problems Probable Causes Solutions Pump adapters are The material will change Elevate the pump with wood or another type of insulated not level with the shape; this is normal. material to bring the pump’s adapters to the same level as hot tub adapters the hot tub’s adapters.
- Page 20 TROUBLESHOOTING FOR WI-FI ENABLED HOT TUBS ONLY Problems Probable Causes Solutions The Wi-Fi setup The pump has been connected If the router your pump is connected to is dual-band and is not successful to the wrong band. currently not connecting to a 2.4GHz network, please switch to another band of the same router (2.4GHz) and try to pair pump heater again.
-
Page 21: Error Codes
ERROR CODES Error Code Probable Causes Solutions The water flow The water flow sensor flags didn’t Unplug the plug gently, strike the side of the pump but not sensors work fall back into the correct position. violently, and plug it back in. without pressing the filter or heat The water flow sensors... - Page 22 ERROR CODES Error Code Probable Causes Solutions The water temperature is The hot tub is not designed to operate with water The pump’s thermometer over 119°F (48°C). temperatures greater than 104°F (40°C). Unplug the reads the water pump and restart it when the water temperature reaches temperature as 100°F (38°C) or lower.
- Page 23 You will be required to submit proof of purchase from an authorized seller. This warranty does not cover Products purchased as used or “second hand as is”. Bestway reserves the right to request additional information in order to process a warranty claim, including, but not limited to, Product serial numbers or photos of the Product or parts.
- Page 24 Please write the problem you are having with your specific product, be as detailed as possible: Note: MAIL-IN OPTION ONLY. This Mailing information: Bestway (USA), Inc. warranty form must be filled out with a Attn: Warranty copy of your receipt/invoice and mailed 3435 S.
Need help?
Do you have a question about the SALUSPA S100105 and is the answer not in the manual?
Questions and answers
I have a new replacement pump from the recall S100205. It has a Wi-Fi flashing signal and I can only get the temp to 64. It will not heat any higher. I a. Not able to use Wi-Fi. Can I get a different pump replacement or how do I override the Wi-Fi signal it is trying to connect tomwifi
You cannot override the Wi-Fi signal to increase the temperature above 64 degrees. However, if the Wi-Fi connection fails, you can press any button to remove the alarm and continue using the hot tub without the Wi-Fi connection. The pump will still function, but Wi-Fi features will be disabled.
This answer is automatically generated
I have a S100105 saluspa hot tub. The pump turns on but the massage system does not work. any suggestions.
Need diagram for Bestway Model S100105
i need instill directions manual
Is there an o ring in the air connection from pump to tub?
how much water does this tub need?
708-837-7645
Can you call me