Advertisement
©2023 Bestway Inflatables & Material Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten/Tutti i diritti riservati
Trademarks used in some countries under license from/
Marques utilisées dans certains pays sous la licence de/
Marcas comerciales utilizadas en algunos países bajo la licencia de/
Die Warenzeichen werden in einigen Ländern verwendet unter Lizenz der/
Marchi utilizzati in alcuni paesi concessi in licenza a
Bestway Inflatables & Material Corp., Shanghai, China
Manufactured, distributed and represented in the European Union by/
Fabriqués, distribués et représentés dans l'Union Européenne par/Fabricado, distribuido y representado en la Unión Europea por/
Hergestellt, vertrieben und in der Europäischen Union vertreten von/Prodotto, distribuito e rappresentato nell'Unione Europea da
Bestway Europe S.p.a., Via Resistenza, 5, 20098 San Giuliano Milanese (Milano), Italy
Distributed in Latin America by/Distribué en Amérique latine par/Distribuido en Latinoamérica por/Distribuído na América Latina por
Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea, Pudahuel, Santiago, Chile
Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104 Carnarvon St Silverwater, NSW 2128, Australia
Tel: Australia: +61 2 9037 1388; New Zealand: +0800 142 101
Distributed in United Kingdom by Bestway Corp UK Ltd. 8 Wentworth Road, Heathfield Industrial Estate, Newton Abbot, Devon, TQ12 6TL
Exported by/Exporté par/Exportado por/Exportiert von/Esportato da
Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited
Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon, Hong Kong
www.bestwaycorp.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Bestway S100101
Summary of Contents for Bestway S100101
- Page 1 Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104 Carnarvon St Silverwater, NSW 2128, Australia Tel: Australia: +61 2 9037 1388; New Zealand: +0800 142 101 Distributed in United Kingdom by Bestway Corp UK Ltd. 8 Wentworth Road, Heathfield Industrial Estate, Newton Abbot, Devon, TQ12 6TL Exported by/Exporté par/Exportado por/Exportiert von/Esportato da Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited...
-
Page 2: Table Of Contents
OWNER’S MANUAL S100101/S100201 WE SUGGEST NOT TO RETURN THE PRODUCT TO THE STORE QUESTIONS? PROBLEMS? Visit the Bestway YouTube channel MISSING PARTS? For FAQ, Manuals, Videos Or spare Parts, Please Visit bestwaycorp.com/support CONTENTS IMPORTANT SAFETY INSTRUCTIONS pg 002 PRE-SETUP pg 012... - Page 3 WARNINGS – SAFETY INSTALLATION • The spa must be supplied through an isolating transformer or supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30mA. • The spa must be supplied by an earthed power source. •...
- Page 4 • Install at least 2m from all metal surfaces. • No part of the appliance is to be located above the bath during use. • Parts containing live parts, except parts supplied with safety extra-low voltage not exceeding 12V, must be inaccessible to a person in spa pool;...
- Page 5 reduced to under 40°C (104°F). When using an external thermometer, the temperature showed on the control panel and the external thermometer may be different. The difference should be around 3 degrees. This situation is normal due to the different location where the two instruments read the temperature.
- Page 6 • Always keep plug dry, plug in with wet plug is definitely forbidden. • Always unplug the appliance: - Before cleaning or other maintenance. - If leaving it unattended on holidays. • Never wear your contact lenses when in your spa. DANGER - Risk of Injury.
- Page 7 • A safety cover or other safety protection device shall be used, or all doors and windows (where applicable) shall be secured to prevent unauthorized access to the spa. • Barriers, covers, alarms, or similar safety devices are helpful aids, but they are not substitutes for continuous and competent adult supervision.
- Page 8 • Removable ladders, when removed, shall be stored safely where children cannot climb on it. • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Page 9 • Whenever the spa is emptied, the filter should be cleaned (and drained/dried, where applicable). • Please examine equipment before use. Notify Bestway at the customer service address listed on this manual for any damaged or missing parts at the time of purchase. Verify that the equipment components represent the models that you had intended to purchase.
- Page 10 heating of the spa between uses (but not while it is being used). Ensure the cover is fitted tightly, as per instructions to maximize insulation. It shall be recommended that the cover, when not in use, should be kept off the ground to retain its cleanliness (particularly the surface in close proximity to the water spa water surface).
- Page 11 • Transmitter working frequency: 2412~2472MHz • Transmitter maximum output power:19dBm WARNINGS - PRCD • Before inserting plug into a power outlet, make sure the current rate of the power outlet is suitable for the pump. • The spa is a class I electrical appliance and must be connected directly to a grounded socket.
-
Page 12: Pre-Setup
PRE-SETUP CHECK LIST To check the parts printed on the package, verify that the equipment components represent the model that you had intended to purchase. In case of any damaged or missing parts at the time of purchase, visit our website bestwaycorp.com/support. - Page 13 utility pipes, lines or cables of any kind. • The selected position must be far from the house entrance. Do not position any equipment or other furniture around the spa. The water that comes out of the spa during the use or due to a faulty product can damage the furniture inside the house or surrounding the pool.
- Page 14 have to be eliminated from the set-up location. • Do not leave the spa's surface exposed to direct sunlight for long periods of time. We recommend protecting the spa from direct sun light exposure by a cover when not in use. •...
-
Page 15: Installation
INSTALLATION For the installation instructions, follow the drawings printed on the package. Drawings are for illustration purposes only. May not reflect actual product. Not to scale. RECOMMENDATIONS DURING THE INSTALLATION • Use of an extension cord or multi-plug adaptor with the spa heater is dangerous and can cause the plug to overheat, causing damage to the equipment and surrounding items. - Page 16 TEMPERATURE ADJUSTMENT BUTTONS:Pressing CELSIUS/FAHRENHEIT TOGGLE:The temperature button, the display starts to flash showing can be displayed in either Fahrenheit or Celsius. the set temperature for 3 seconds, after that it will show again to the real water temperature. When it is flashing you can adjust the temperature using the button.
-
Page 17: Maintenance
MAINTENANCE CAUTION: You must ensure the pump is unplugged before beginning spa maintenance to avoid risk of injury or death. LINER • It is normal that your spa liner may appear as if it is losing air. Changes in ambient temperature may change the internal air pressure in the liner. •... -
Page 18: Troubleshooting
TROUBLESHOOTING Problems Probable Causes Solutions Pump does not operate - Power failure - Check power source - Power circuits is broken - For assistance, please visit the support section on our website, www.bestwaycorp.com Pump does not - Temperature set too low - Set spa to a higher temperature;... - Page 19 ONLY FOR SPA EQUIPPED WITH Wi-Fi Problems Probable Causes Solutions The pump has been connected to the If the router your pump is connected to is dual-band and currently not wrong band connecting to a 2.4GHz network, please switch to another band of the same router (2.4GHz) and try to pair pump heater again.
-
Page 20: Error Codes
ERROR CODES CAUSES REASONS SOLUTIONS The water flow sensors work without 1. The water flow sensor flags didn’t fall back into the 1. Unplug the plug gently, strike the side of the pump but not violently, and plug it pressing the filter or heat button. correct position. - Page 21 TEST TEST RESET RESET TEST TEST RESET RESET TEST TEST RESET RESET TEST TEST RESET RESET...
- Page 22 A: 1.
Need help?
Do you have a question about the S100101 and is the answer not in the manual?
Questions and answers