Page 1
Trademarks used in some countries under license from / Manufactured by Bestway Inflatables & Material Corp., No. 208 Jin Yuan Wu Road, Shanghai, 201812, China (Tel: +86 21 69135588). Represented in North America by Bestway (USA) Inc., 3435 S. McQueen Road, Chandler, AZ 85286, United States of America. www.bestwayusa.com...
• For the installation instructions, refer to the illustration steps on the package. Drawings are for illustration purposes only. May not reflect actual product. Not to scale. • Bestway will not be responsible for any damage caused to the hot tub due to mishandling or failure to follow these instructions.
SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS READ, FOLLOW AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS. Carefully read and follow all information in this user manual before installing and using the spa. These warnings, instructions and safety guidelines address some common risks of water recreation, but they cannot cover all risks and dangers in all cases.
Page 4
SAFETY INFORMATION DANGER: Risk of Electric Shock. Do not permit any electric appliance, such as a light, telephone, radio, or television, within 5 feet (1.5 m) of a spa. DANGER: Risk of injury. a) Replace damaged cord immediately. b) Do not bury cord. c) Connect to a grounded, grounding type receptacle only.
Page 5
1. Take out the warning label from the accessory kit. 2. Carefully peel the warning label. 3. Affix the warning label in an appropriate location. 4. To order a replacement warning label, please contact your local Bestway After Sales Service. WATER TEMPERATURE INFORMATION...
Page 6
(2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party – U.S. Contact Information Company: Bestway (USA) Inc. Address: 3435 S. McQueen Road, Chandler, AZ 85286, United States of America Telephone or internet...
Page 7
Limited by local law regulations, version for North America does not have region selection option. ANSI/APSP/ICC-16 SOFA STANDARD Installation Information label (Copy) Manufacturers name: Bestway (Nantong) Recreation Corp. Cover part number: P01 Life expectancy: 3 Years Cover flow rating: 60 GPM...
Page 8
SAFETY INFORMATION Please research and download General Certificate of Conformity through www.bestwayusa.com. SAVE THESE INSTRUCTIONS WARNING: CHILDREN SHOULD NOT USE SPAS OR HOT TUBS WITHOUT ADULT SUPERVISION. WARNING: DO NOT USE SPAS OR HOT TUBS UNLESS ALL SUCTION GUARDS ARE INSTALLED TO PREVENT BODY AND HAIR ENTRAPMENT. WARNING: PEOPLE USING MEDICATIONS AND/OR HAVING AN ADVERSE MEDICAL HISTORY SHOULD CONSULT A PHYSICIAN BEFORE...
PRODUCT DESCRIPTION HOT TUB HEATER SPECIFICATIONS: Power Rate 110-120V AC, 60Hz, 12A PARTS & TOOLS NEEDED Compare the parts in your box to the parts listed on the top of the package. Verify that the equipment components represent the model that you had intended to purchase. If any parts are damaged or missing at the time of purchase, visit our website bestwayusa.com/support.
Page 10
SETUP INSTRUCTIONS • To minimize these effects in an indoor environment, provide plenty of ventilation to the selected area. Consult an expert to confirm the installation area is properly ventilated prior to use. • To avoid home or property damage, only install the hot tub in an area with an adequate drainage system.
USAGE INSTRUCTIONS CONTROL PANEL ON/OFF BUTTON: After activating the GFCI, press and hold the button for 2 seconds. button will light up green and the control panel can now be used. Press and hold the button for 2 seconds to turn off all activated functions. CELSIUS/FAHRENHEIT TOGGLE: The temperature can be displayed in either Fahrenheit or Celsius.
Page 12
USAGE INSTRUCTIONS TEMPERATURE ADJUSTMENT BUTTONS: Pressing the buttons will activate the display, which will flash, showing the set temperature for 3 seconds. After that it will show the actual water temperature. Adjust the set temperature using the button. The default set temperature is 95°F (35°C). Temperature adjustments range from 68°F (20°C) to 104°F (40°C).
USAGE INSTRUCTIONS HEATING TIMES For the water to reach 104°F (40°C), the time required is based on the starting water temperature and outdoor temperature. The data below is purely for reference. To display the current water temperature, run the filter system for at least a minute. Outdoor Temperature Water Temperature Set Temperature...
Page 14
MAINTENANCE INSTRUCTIONS Chemical Tablets (Not Included): • Remove the chemical dispenser from the hot tub when the hot tub is in use. • After performing chemical maintenance and before using the hot tub, use a test kit (not included) to test the water chemistry.
DISASSEMBLY & STORAGE INSTRUCTIONS DRAINING To drain the hot tub, follow the drawings. Drawings are for illustration purposes only. May not reflect actual product. Not to scale.
Page 16
DISASSEMBLY & STORAGE INSTRUCTIONS DRYING RESET RESET RESET RESET TEST TEST TEST TEST • To dry the different parts of the hot tub, follow the drawings. Drawings are for illustration purposes only. May not reflect actual product. Not to scale. •...
Page 17
DISASSEMBLY & STORAGE INSTRUCTIONS Detergent residue and dissolved solids from bathing suits and chemicals may build up on the hot tub walls. Use soap and water to clean the walls and rinse thoroughly. Do not use hard brushes or abrasive cleaners. DEFLATING •...
DISASSEMBLY & STORAGE INSTRUCTIONS REPAIRING When repairing the cover or interior floor: Use the provided repair patch to repair tears or punctures. • Clean the area, and carefully peel the patch. • Stick the patch over the damaged area. • Wait 30 seconds before re-inflation. When repairing the walls or exterior floor: Use the provided repair patch and glue (not included) to repair tears or punctures.
Page 19
TROUBLESHOOTING Problems Probable Causes Solutions Pump adapters are The material will change Elevate the pump with wood or another type of insulated not level with the shape; this is normal. material to bring the pump’s adapters to the same level as hot tub adapters the hot tub’s adapters.
Page 20
TROUBLESHOOTING FOR WI-FI ENABLED HOT TUBS ONLY Problems Probable Causes Solutions The Wi-Fi setup The pump has been connected If the router your pump is connected to is dual-band and is not successful to the wrong band. currently not connecting to a 2.4GHz network, please switch to another band of the same router (2.4GHz) and try to pair pump heater again.
ERROR CODES Error Code Probable Causes Solutions The water flow The water flow sensor flags didn’t Unplug the plug gently, strike the side of the pump but not sensors work fall back into the correct position. violently, and plug it back in. without pressing the filter or heat The water flow sensors...
Page 22
ERROR CODES Error Code Probable Causes Solutions The water temperature is The hot tub is not designed to operate with water The pump’s thermometer over 119°F (48°C). temperatures greater than 104°F (40°C). Unplug the reads the water pump and restart it when the water temperature reaches temperature as 100°F (38°C) or lower.
Page 23
You will be required to submit proof of purchase from an authorized seller. This warranty does not cover Products purchased as used or “second hand as is”. Bestway reserves the right to request additional information in order to process a warranty claim, including, but not limited to, Product serial numbers or photos of the Product or parts.
Page 24
Please write the problem you are having with your specific product, be as detailed as possible: Note: MAIL-IN OPTION ONLY. This Mailing information: Bestway (USA), Inc. warranty form must be filled out with a Attn: Warranty copy of your receipt/invoice and mailed 3435 S.
Need help?
Do you have a question about the SALUSPA S300206 and is the answer not in the manual?
Questions and answers