Do you have a question about the SALUSPA and is the answer not in the manual?
Questions and answers
jimmie
March 19, 2025
what is the part called that goes from the outside to the bottom
1 comments:
Mr. Anderson
May 14, 2025
The part that connects the outside to the bottom of the Bestway SaluSpa is the one-way valve.
This answer is automatically generated
gail walker rojas
February 17, 2025
Unplugged machine during electircal work and now it beeps and sends an error code 6CF. doesn't show lock sign or pump/heater etc won't turn on. The water feels a bit cold so do I add warm water and see??? Thanks
1 comments:
Mr. Anderson
February 17, 2025
Error code 6CF on the Bestway SaluSpa indicates a failure in the ground connection. This means there is a problem with the ground bonding in your home.
To resolve this issue: 1. Connect the hot tub pump to a different outlet socket. 2. If the problem continues, call an electrician to check and evaluate the socket you are using.
This answer is automatically generated
robert wice
July 31, 2025
is this 110 volts
robert wice
July 31, 2025
i plug the pumpcant get it to come on
Linda DeBiase
July 13, 2025
Which button inflates my spa?
Linda Fowler
July 1, 2025
How many hours a day should the filter be run.. it’s a Bestway saluspa honolulu
John Tonnemacher
May 12, 2025
I am seeing a flashing 01H code on the display for a Saluspa display.
Michaelq=
March 12, 2025
Number "13" displayed on panel when connecting pump to power.
MAINTENANCE pg 021 DISASSEMBLY AND STORAGE pg 023 TROUBLESHOOTING pg 025 ERROR CODES pg 026 VISIT BESTWAY YOUTUBE CHANNEL FOR INSTRUCTION VIDEOS WE SUGGEST NOT TO RETURN PLEASE VISIT: THE PRODUCT TO THE STORE QUESTIONS? PROBLEMS? MISSING PARTS? BESTWAYCORP.COM/SUPPORT For FAQ, Manuals, Videos Or spare Parts, Please Visit bestwaycorp.com/support...
IMPORTANT SAFETY INSTRUCTIONS WARNING IMPORTANT SAFETY INSTRUCTIONS When using this electrical equipment, basic safety precautions should always be followed, including the following: READ AND FOLLOW ALL INSTRUCTIONS. WARNING – To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.
Page 4
CAUTION: Immediately leave spa if the user feels uncomfortable or sleepy. NOTE: Please examine equipment before use. Notify Bestway at the customer ® service address listed on this manual for any damaged or missing parts at the time of purchase.
Page 5
The warning label must be posted near your spa in a readable position during using your spa. 1. Take out the warning label from the accessory kit. 2. Carefully peel the warning label. 3. Affix the warning label. To order the warning label, please contact your local Bestway After Sales Service.
Page 6
SPA SUCTION FITTING INSTRUCTIONS When installing and using this equipment, basic safety precautions shall always be followed, including the following: IMPORTANT SAFETY INSTRUCTIONS READ, FOLLOW, AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS. • Any modification that increases the flow rate of the circulation system shall require re-evaluation of the cover/grate and sump to ensure that the flow rating of the Suction Outlet Fitting Assembly (SOFA) is not exceeded.
Page 7
SaluSpa is installed (not on the carpet or other similar material). If the SaluSpa is placed on a surface which does not meet these requirements, any damage caused by improper support is not covered under the manufacturer’s warranty.
PRE-SETUP CHECK LIST PARTS CHECKS Please examine equipment before use. Notify Bestway® customer service of any damaged or missing parts at the time of purchase. Verify that the equipment components represent the model that you had intended to purchase. For reference please use the diagrams below.
Page 9
CANCUN AIRJET S100105 (60004) — 71" x 26" / 1.80 m x 66 cm 2 - 4 2-3ºF/h 320 gal/h 0.055Bar 177 gal 1,534 Lb 1-1.5ºC/h 1,211 L/h 0.8PSI 669 L 696 kg P05332(US)/ P05138 P05162 04 54123GASS17 P6931ASS16 P05343 P05333(NA) P05345 P05524...
Page 10
TAHITI AIRJET S100105 (60008) — 71" x 26" / 1.80 m x 66 cm 2 - 4 2-3ºF/h 320 gal/h 0.055Bar 177 gal 1,534 Lb 1-1.5ºC/h 1,211 L/h 0.8PSI 669 L 696 kg P05332(US)/ P05144 P05166 04 54123GASS17 P6931ASS16 P05343 P05333(NA) P05345 P05524...
Page 11
HONOLULU AIRJET S100105 (60020) — 77" x 28" / 1.96 m x 71 cm 4 - 6 2-3ºF/h 320 gal/h 0.08Bar 242 gal 2,103 Lb 1-1.5ºC/h 1,211 L/h 1.2PSI 916 L 954 kg P05332(US)/ P05191 P05195 04 54174GASS18 P05341 P05343 P05333(NA) P05345 P05524...
Page 12
ST. MORITZ AIRJET S100105 (60024) — 85" x 28" / 2.16 m x 71 cm 5 - 7 1-2ºF/h 320 gal/h 0.08Bar 314 gal 2,668 Lb 0.5-1ºC/h 1,211 L/h 1.2PSI 1190 L 1210 kg P05332(US)/ P05197 P05201 04 54175GASS18 P05341 P05343 P05333(NA) P05345...
Page 13
ST.LUCIA AIRJET S100105 (60038) — 67" x 26" / 1.70 m x 66 cm 2 - 3 2-3ºF/h 320 gal/h 0.055Bar 160 gal 1,389 Lb 1-1.5ºC/h 1,211 L/h 0.8PSI 605 L 630 kg P05332(US)/ P05661 P05662 P05091 P6931ASS16 P05343 P05333(NA) P05345 P05524 09 F4C009B-02ASS17 1...
INSTALLATION < 50°F(10°C) SET-UP INSTRUCTION IN WINTER > 59°F(15°C) > 59°F(15°C) It is important to follow these suggestions if you are setting up the spa during the winter period. This will prevent damage to the PVC material and extend the life of your product drastically.
Page 15
5 min HELSINKI 0.48-0.69Bar 7-10PSI 5 min...
Page 16
GFCI Test IMPORTANT: RISK OF ELECTRIC SHOCK. THE GFCI MUST BE TESTED BEFORE TURNING ON THE PUMP EACH TIME. 1. Plug the GFCI into a power outlet, the indicator turns red. 2. Press the test button, the indicator turns off. 3.
Page 17
Air Valve Check (for spa with quick inflation/deflation valve) Always check the air valve carefully before inflation to ensure there is not an air leak. If the air valve is loose, use the provided wrench to fasten the air valve following these steps: With one hand, hold the backside of the air valve from the inner side of the spa wall and turn the wrench clockwise.
USING THE SPA Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the normal body temperature of 98.6°F(37°C). The symptoms of hyperthermia include an increase in the internal temperature of the body, dizziness, lethargy, drowsiness, and fainting. The effects of hyperthermia include failure to perceive heat, failure to recognize the need to exit spa or hot tub, unawareness of impending hazard, fetal damage in pregnant women, physical inability to exit the spa or hot tub, and unconsciousness resulting in the danger of...
Page 19
NOTE: If the heating system is activated the filtration system will automatically start. NOTE: After turning off the heating system the filtration system will continue to operate. NOTE: If the spa heater is on when the water temperature is below 42.8°F(6ºC), the heating system will warm the water until 50°F(10ºC) automatically.
Page 20
WINTER USE INSTRUCTIONS • You can keep the spa on during winter when the temperature is lower than 42.8°F(6°C). The Freeze Shield™ system automatically keeps the water temperature between 42.8°F(6°C) and 50°F(10°C), and it will prevent the water from freezing. Important: If the water temperature is below 42.8°F(6°C), the spa heater must always be on.
MAINTENANCE CAUTION: You must ensure the pump is unplugged before beginning spa maintenance to avoid risk of injury or death. Adding Air: Your spa will require additional air to be added from time to time. Changes in temperature from day to night will change the pressure in the spa and may cause a certain amount of deflation.
Page 22
No cleaning water may flow into the spa or spa water cycle. The dirt and cleaning agents shall be rinsed carefully to drain in the spa surround. Note: We recommend you take a shower before using your SaluSpa, as cosmetic products, lotions, and other residues on the skin can quickly degrade water quality.To use the chemical dispenser, please follow the below instruction.
DISASSEMBLY AND STORAGE DRAINING THE SPA NOTE: Dry the spa pool. Only for Drop stitch Spa P00217 NOTE: Dry the spa pool NOTE: Lift up the spa when there is only a little water left. Damages to the handles are not covered under the warranty.
Page 24
Make sure the spa and pump are completely dry. This is essential to extend the life of the spa. We recommend using the pump to blow dry the spa, pump and pipes. Remove the filter sets and discard the used filter cartridges. Re-attach the two stopper caps onto the spa’s inlet and outlet valves.
Bestway strives to provide the most trouble-free spas on the market. If you experience any problems whatsoever, do not hesitate to contact Bestway or your authorized dealer. Here are some helpful tips to help you to diagnose and rectify some common sources of trouble.
ERROR CODES CAUSES REASONS SOLUTIONS The water flow sensors work 1. The water flow sensor flags didn’t fall back into the 1. Unplug the plug, strike the side of the pump but not violently, and plug it back in. without pressing the filter or heat correct position.
Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea, Pudahuel, Santiago, Chile Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104 Carnarvon St Silverwater, NSW 2128, Australia Tel: Australia: (+61) 29 0371 388; New Zealand: 0800 142 101 Exported by/Exporté...
Need help?
Do you have a question about the SALUSPA and is the answer not in the manual?
Questions and answers
what is the part called that goes from the outside to the bottom
The part that connects the outside to the bottom of the Bestway SaluSpa is the one-way valve.
This answer is automatically generated
Unplugged machine during electircal work and now it beeps and sends an error code 6CF. doesn't show lock sign or pump/heater etc won't turn on. The water feels a bit cold so do I add warm water and see??? Thanks
Error code 6CF on the Bestway SaluSpa indicates a failure in the ground connection. This means there is a problem with the ground bonding in your home.
To resolve this issue:
1. Connect the hot tub pump to a different outlet socket.
2. If the problem continues, call an electrician to check and evaluate the socket you are using.
This answer is automatically generated
is this 110 volts
i plug the pumpcant get it to come on
Which button inflates my spa?
How many hours a day should the filter be run.. it’s a Bestway saluspa honolulu
I am seeing a flashing 01H code on the display for a Saluspa display.
Number "13" displayed on panel when connecting pump to power.