GENERAL PRECAUTIONS Read the instructions carefully before beginning the installation and carry out the actions as specified by the • manufacturer. The installation, programming, commissioning and maintenance of the product must only be carried out by • qualified technicians, properly trained in compliance with the regulations in force, including health and safety measures and the disposal of packaging.
The device automatically recognises the local or PoE power supply. F Reset button. When pressed it reboots the device; this operation DOES NOT require any deleting of program- ming. Function of terminals Local power supply input Landing call input Alarm input Technical data Type XTS 7IP WIFI...
Page 5
to make the device's installation more solid, use the supplied screws and dowels to fasten the frame to the wall. Notes on installing indoor receivers connected to the WiFi network Install the indoor receiver: away from any metal objects that may interfere with the signal, or from any devices that generate magnetic fields.
Examples of installation The Master/Slave configuration of the devices is programmed using the PCS/XIP software. Single-family system with POE power supply Switch PoE Master Modem router Wi-Fi Slave MTMV/IP Single-family system with local power supplies and internal receiver connected in Wi-Fi VAS/101 Master Modem router Wi-Fi...
Page 7
Multi-family system with an internal receiver for each apartment APARTMENT 4 APARTMENT 3 APARTMENT 2 APARTMENT 1 APARTMENT 4 APARTMENT 3 MODEM MODEM ROUTER Wi-Fi ROUTER Wi-Fi SWITCH PoE APARTMENT 2 APARTMENT 1 MODEM MODEM ROUTER Wi-Fi ROUTER Wi-Fi SWITCH PoE Master Slave MTMV/IP...
Page 8
Home in which there are several internal receivers, one of which connected to the apartment block LAN, the others to the home LAN SWITCH PoE APARTMENT 1 10.0.X.X 10.0.X.X MODEM ROUTER Wi-Fi 192.168.X.X Switch PoE SWITCH PoE Master 10.0.X.X Slave MTMV/IP A call from the entry panel can ring a maximum of 20 devices (man- aged by the internal Master receiver of the apartment), whether they...
Page 9
Home in which there are several internal receivers, some of which connected to the apartment block LAN SWITCH PoE APARTMENT 1 10.0.X.X 10.0.X.X 10.0.X.X MODEM ROUTER Wi-Fi 10.0.X.X SWITCH PoE Master 10.0.X.X Slave MTMV/IP A call from the entry panel can ring a maximum of 20 devices (man- aged by the internal Master receiver of the apartment), whether they are connected to the LAN line or reachable from a Wi-Fi or mobile network using CAME Connect.
Page 10
Home in which there are several internal receivers connected to the home network, in which the local server (ETI/MiniSER) acts as the master receiver of the apartment SWITCH PoE APARTMENT 1 10.0.X.X 10.0.X.X 192.168.X.X MODEM ROUTER Wi-Fi ETI/MiniSER Switch PoE SWITCH PoE Master 10.0.X.X...
COMMISSIONING Once the cables are laid and connected, program the essential function for operating the device. Scroll the available pages. Select item A. CCTV Messages Settings 19:02 Thursday 01 Feb 2018 Info Back Home Scroll the list. Select menu item B. Quick commands Video recording IP video cameras...
Page 12
Network This section is used to determine how the device connects to the Ethernet Enabled Disabled network. A Enable/disable the desired con- Configure Ethernet nection types Wireless Enabled Disabled B Indicate whether the connection Configure WiFi to the gateway take place over the Ethernet network or through Wi-Fi.
Wireless connection configuration H This button is for selecting and setting up a Wifi network. Type of connection WiFi The icon indicates that the Wi- Configure WiFi Fi connection mode is active. Mode DHCP Static IP address Netmask Gateway Save 19:02 Thursday 01 Feb 2018...
Page 14
CAME Connect (only on master receiver) A Device's univocal code. B For enabling or disabling the VoIP remote control of the video-in- Keycode tercom call. Enable connection The factory settings require that the connection to CAME Connect be Internet service provider disabled.
SIP settings (only on slave receiver) Manual Mode A In this space enter the “SIP User Mode Manual Automatic Name” assigned to the device by Flat Id PCS Xip. Username B In this space enter the password assigned in the receiver credentials Password in the server set-up window.
Automatic door opener This function, which is especially useful for businesses, lets you automatically open the entrance once the call-but- ton is pressed on the entry panel. The activation of this function can be programmed to schedule time slots and days of the week.
For editing the selected ele- ment. 08:30 12:30 For eliminating the selected 13:30 18:30 element. Touch the Back button to return to New time-slot the list of configurable parameters. Delete all 19:02 Thursday 01 Feb 2018 Info Back Home Configuring the user interface Using the PC software [UI Creator], it is possible to design and program a custom graphical interface within the system master server for the XTS device.
Touch each of the empty sections and use the drop-down menu to Number of frames: select the content that you want to assign to the section. Empty Empty Save the setting by touching the Save button. Empty Settings Save 19:02 Thursday 01 Feb 2018 Info...
Page 19
SETTINGS AVAILABLE ONLY FROM WEB PAGE The web pages, in addition to allowing the configuration of most of the parameters that can be set by the interface of the receiver, allow provide some additional functions illustrated in this section. Type the address of the device in the browser address bar XTS 7 IP (Chrome, Firefox, Safari).
Node status Help Exit On master receivers, through this System CHARACTERISTICS NODES STATUS window it is possible to view the connection status of the SIP nodes. Date and Time B Choose the type of SIP nodes for NODE TYPE Network which you want to view the status.
Password change Maintenance Help Exit In this window it is possible to change the password used to ac- System UPDATE... CHANGE PASS... CONFIGUTION... cess. Date and Time PASSWORD Network NEW PASSWORD IP video cameras Voicemail CONFIRM NEW PASSWORD Maintenance Diagnostics Save Cancel Diagnostics...
Page 24
Pertinent Regulations. CAME SpA, the manufacturer, declares that the products described in this manual con- forms to Directive 2014/53/EU. The complete wording of the EU declaration of conformity is available at the follow- ing Internet address: www.came.com Decommissioning and disposal. Dispose of the packaging and the device at the end of its life cycle responsibly, in compliance with the laws in force in the country where the product is used.