GENERAL PRECAUTIONS Carefully read the instructions before using the device. • The installation, programming, commissioning and maintenance of the product must only be carried out by • qualified technicians, properly trained in compliance with the regulations in force, including health and safety measures and the disposal of packaging.
Page 3
Commands and notifications found on the home page The appearance of the homepage may vary according to the system configuration or the user interface. Favourites Entry panels Contacts Video Recording Aux List Call register 19:02 Thursday 01 Feb 2018 Info Back Home A Command to exclude call ringer;...
HOW TO USE THE DEVICE Answering a call Call from Entry Panel An image of the caller appears on the screen. The audio from and towards the caller is turned off. A Touch the button to answer the call and to turn on the audio communication. B Touch the button to refute the call and to return to the homepage.
Making a call This device lets you call other indoor receivers (intercommunication), any devices connected over the Wifi network or, any entry panels. Calling a contact on the favorites list A Touch the icon to access the list Favourites Entry panels Contacts of favorite contacts.
Page 6
Turn on communication to entry panel Favourites Entry panels Contacts B Touch the icon to access the list of entry panels. To fill the list of entry panels, see the "Contacts" chapter on page 7. Video Recording Aux List Call register 19:02 Thursday 01 Feb 2018...
Page 7
Contacts Touch the icon to access the con- tacts list. Favourites Entry panels Contacts Video Recording Aux List Call register 19:02 Thursday 01 Feb 2018 Info Back Home The list contains all the devices that can be contacted. Unit Entry panel Intercom 1 Intercom 2 Intercom 3...
Unit A Residential unit (includes the Unit indoor receiver and any associated EXTENSIONS apps). XTS receiver B The indoor receiver. Mobile App 1 C Possible users connected to the system via app, either locally or Mobile App 2 from a remote location. Mobile App 3 Touch one of the contacts to initiate Mobile App 4...
Concierge G Concierge panel, if the system Concierge features this. Touch the contact to initiate the call. Touch the icon to edit the contact's name. Video Recording A Touch the icon the turn the an- swering service on or off. Favourites Entry panels Contacts...
Aux List A Touch the icon to access the list of auxiliary contacts. Favourites Entry panels Contacts The auxiliary commands (AUX) let you activate suitably programmed contacts to carry out additional commands to the classic opening of the entry door. Video Recording Aux List Call register...
Page 11
Types of calls Incoming call. 29 Jan 2018 19:55 Entry panel Outgoing call. 28 Jan 2018 11:23 Entry panel Missed call. 07 Jan 2018 21:03 Entry panel Any missed calls are highlighted . 05 Jan 2018 14:21 Entry panel Touch the line you want to call your Delete all contact.
GENERAL SETTINGS Touch the icon to return to the list of settings. CCTV Settings 19:02 Thursday 01 Feb 2018 Info Back Home System information This window gives technical infor- mation that is useful for identifying System information the device's characteristics and the hardware and software versions.
Page 13
Date/time This window is for setting the date and time on the indoor receiver. Mode Manual Auto A The date and time are manually Auto mode System set by the user. B Date and time are synchronized NTP server automatically. Date/Time 01 Feb 2018 19:02 The network to which the de-...
B Touch the area to assign a name to the AUX command that you are Description Gate opener going to add. Command Aux 3 C Choose the command to asso- ciate the AUX to, from the list. Destination Entry panel Save the setting by touching the Save button.
Page 15
Video Recording If the system has a video intercom entry panel installed, if the called user is not in, the device lets the caller record a video message. The caller may be notified of this by a courtesy message, for example, "The user is not available at the moment, please leave a message after the beep".
Page 16
B Touch the area to assign a name to the IP video camera that you are Description going to add. URI for live connection C Touch the area and type the URI string for connecting the video camera. URI for the fixed image D Touch the area and type the URI string for acquiring the static image from the video camera, needed for...
Page 17
Backdrops Select your preferred backdrop;; the new configuration is applied Background immediately. Touch the Back button to return to the list of configurable parameters. 19:02 Thursday 01 Feb 2018 Info Back Home Display A Adjusts the brightness of the screen during use. Brightness B Adjusts the brightness of the screen saver when the screen is in...
Advanced settings This section requires specific know-how in operating the vid- Quick commands eo-intercom system. Wrong set- Video recording tings may cause partial or even total malfunctions; that is why IP video cameras the editing of some parameters Backdrops is allowed only after entering the installer password;...
Page 19
Network C This button is for enabling WiFi communication. Type of connection WiFi This icon shows that the WiFi Enabled connection is active, enabling the Configure WiFi network-settings sections below. Mode DHCP Static D Lets you choose the type of ad- dress from: IP address DHCP...
Page 20
3 The page shows the detected networks; to manually scan for net- Public WiFi works, touch the J button. Unprotected Smith home WiFi Select a network to connect to. Protected If the network is unprotected the Add WiFi network connection will be immediate. Scan If the network is protected, enter the password for the WiFi network...
Multimedia This window lets you configure the maximum BITRATE that the device Audio coding can handle, while choosing among the available values. Video coding The greater the BITRATE val- Video App Bitrate (Kbps) ues, the better the video quali- ty, but also the greater the data bandwidth occupied in UPLINK.
Page 22
C Touch the empty sections and in the pop-up window set the start Start time and finish time of the time-slot for activating the function. Stop time Days of the week Save 19:02 Thursday 01 Feb 2018 Info Back Home D Touch the days of the week dur- ing which the time-slot needs to be Start time...
Configuring the user interface This section is for customizing the appearance of the homepage. Homepage active Preset Customized A Select the type of homepage that you wish to see. Customize Homepage functions B Touch the button to create a customized homepage. 19:02 Thursday 01 Feb 2018...
Maintenance (administrator password required; the default password is 112233). Reboot device A Touch the button to reboot the indoor receiver. Restart application B Touch the button to reboot only Set slave mode the application that runs the indoor Restore preset settings receiver.
Page 25
SETTINGS AVAILABLE ONLY FROM WEB PAGE The web pages, in addition to allowing the configuration of most of the parameters that can be set by the interface of the receiver, allow provide some additional functions illustrated in this section. Type the address of the device in the browser address bar XTS 7 (Chrome, Firefox, Safari).
Maintenance Maintenance Help Exit Update System UPDATE... CHANGE PASS... CONFIGUTION... This window is for updating the Date and Time device's firmware, by proceeding as follows: Network VERSION A Press the button, select the file containing the firmware update on your computer, and start the pro- Credentials cess.
Page 28
Pertinent Regulations. CAME SpA, the manufacturer, declares that the products described in this manual con- forms to Directive 2014/53/EU. The complete wording of the EU declaration of conformity is available at the follow- ing Internet address: www.came.com Decommissioning and disposal. Dispose of the packaging and the device at the end of its life cycle responsibly, in compliance with the laws in force in the country where the product is used.