Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CAME BPT DC-DVC/IP ME
Summary of Contents for CAME BPT DC-DVC/IP ME
- Page 1 FB 00 1 6 2- EN CONFIGURATION MANUAL DC-DVC/IP ME...
- Page 2 General Precautions Read the instructions carefully before beginning the installation and carry out the actions as specified by the manufacturer. • The installation, programming, commissioning and maintenance of the product must only be carried out by qualified technicians, • properly trained in compliance with the regulations in force, including health and safety measures and the disposal of packaging. Before carrying out any cleaning or maintenance operation, disconnect the device from the power supply.
-
Page 3: Connection Examples
Connection examples VAS/101 VLS/101 VLS/101M PROG VAS/100MH – D– VLS/101 VLS/101M... - Page 4 Installation diagrams B Diagram for installation with devices powered by PoE Switch Maximum distance between POE switch and Entry Panel with UTP CAT5, UTP CAT6 cable: 100m. Diagram for installation with locally powered devices With VAS/101 power supply: 1 DVC/IP, 100m cable with 1 mm section With VAS/100.30 power supply: up to 2 DVC/IP devices, 100m cable with 1 mm section...
-
Page 5: Mac Address
Access the settings web page by entering the address of the de- vice that you wish to configure in the address bar of your browser (Chrome, Firefox, Safari). SETTINGS Select the [INSTALLER] login mode and enter the password (de- fault password: 112233) to access the settings screens. LOG-IN MODE The [USER] login mode (default password: 123456) lets you: 1) consult the following pages... -
Page 6: Calls List
Help Exit USERNAME: SIP user name assigned by PCS Xip to the device. System Info PASSWORD: (for future uses). USERNAME DISPLAY NAME: (for future uses). Date and Time 00800000001 SERVER: IP address of the server assigned by PCS Network SERVER TYPE: (for future uses) PASSWORD If all the operations have been carried out correctly and if the SIP server is active, on the [SYSTEM] page the [ACCOUNT STATUS]... -
Page 7: Maintenance
Under [EXTENSIONS] all the devices associated to the contact Calls list are displayed. Select an extension to access the details. System Info CONTACTS EXTENSIONS The lists of the contacts and extensions present on the network, Date and Time Extension 01 which the device can communicate with, will be populated auto- Extension 02 matically by the server. - Page 8 Operations on PCS Xip The device is a constituent part of a system based on the Xip system. For this reason the system structure must be constructed using the PCS Xip software. ETI/miniSER XIP Multi server ETI/miniSER/Domo XIP Server DVC IP Main DVC IP ...