Starting The Sweeper; Starting The Engine; Switching Off The Engine; How To Stop The Sweeper - RCm MONO BOXER D Instruction And Maintenance Handbook

STARTING THE ENGINE

Make sure that the main and side brushes are raised off the fl oor before starting the engine.
DIESEL and PETROL versions:
- move the accelerator lever 27 (fi g. 1) to 3/4 of its stroke.
- insert the starter key 13a (fi g.1).
- turn it clockwise up to the fi rst notch (position 1).
- the glow plug indicator 26 (Fig. 3)(Boxer D - super Boxer D).
- wait until the glow plug indicator has turned off (Boxer D - super Boxer D).
- turn the key to the second stop notch and release the key as soon as the engine starts.
ELECTRIC versions:
- sit down properly on the driving seat.
- insert the starter key 13b (fi g.1).
- turn it clockwise up to the fi rst notch (position 1)
- switch on main motor switch 30 (fi g.1).
STARTING WORK
Disengage the parking brake by pressing on pedal 3 (fi g.1) and release its lever.
To go forwards, press on the front "A" of pedal 1 (fi g. 1).
To reverse, press on the back "B" of the pedal.
The sweeper brakes automatically when pedal 1 is in the neutral position.
The levers 4-5-6 (fi g.1) must be in central position.

SWITCHING OFF THE ENGINE

DIESEL and PETROL versions
- Reduce the engine speed with the accelerator pedal 27 (fi g. 1).
- Switch off the key of the starter switch 13a by turning it to the "0" position (fi g. 1).
- Put on the parking brake 3 (fi g. 1) and lock it using the relevant lever 3a (fi g.1).
- Ensure the ignition key is removed from the machine

HOW TO STOP THE SWEEPER

ELECTRIC versions
- Switch off switch 30 (fi g.1)
- Switch key of the starter switch 13b to the neutral position 0 (fi g.1)
- Put on the parking brake 3 (fi g.1) and lock it using the relevant lever 3a (fi g.1).
- Ensure the ignition key is removed from the machine.
WARNING!
Only lift the motorsweeper on fl at ground ensuring the handbrake is applied and working correctly.

STARTING THE SWEEPER

ENGLISH
45