Table of Contents
Advertisement
Etac / Cross 6 / www.etac.com
Installation instructions are always included with the accessories when delivered from Etac.
Instructions are also available on our website www.etac.com
The seat cushion
is cut to the set seat depth at the front or rear
edge. Make sure that the cushion fits properly between the back posts
with the rounded corners backwards when measuring the length.
The cushion is a standard type and not intended for users with
bed sores.
The cushion can be supplemented with a
It flattens out the front seat, which significantly improves seating
comfort. Place the comfort wedge in the inner pocket of the pillow
case on the underside of the cushion. The arrow on the comfort
wedge should be facing up and pointing forwards.
The positioning belt
is two-piece, adjustable in length and has
a snap-fit buckle. It is mounted in the groove just in front of the back
support, above the rear wheel mount.
The positioning belt is only for positioning in the wheelchair. It
must not replace a seat belt in a car.
14. Settings, accessories
comfort wedge
.
34
Ensure that the user does not slide forwards on the seat as the
belt tightens the blood supply in the hip/waist region.
5 mm
Advertisement
Table of Contents
