Kubota M6S-111 Operator's Manual page 19

M6L-111
(1) Step
M6H-101
(1) Step
• When towing other equipment, use a safety chain
and place an SMV emblem on it as well.
(1) Safety chain
• Set the implement lowering speed lever in the
"LOCK" position to hold the implement in the raised
position.
M6S-111,M6L-111,M6H-101
SAFE OPERATION
(1) 3-point hitch lowering speed
knob
PARKING THE TRACTOR
• Disengage the PTO, lower all implements to the
ground, place all control levers in their neutral
positions, set the parking brake, stop the engine,
remove the key from the ignition and lock the CAB
door (if equipped).
Leaving transmission in gear with the engine
stopped will not prevent tractor from rolling.
• Make sure that the tractor has come to a complete
stop before dismounting.
• Avoid parking on steep slopes. If at all possible,
park on a firm and level surface; if not, park across
a slope and chock the wheels.
Failure to comply with this warning may allow the
tractor to move and could cause injury or death.
OPERATING THE PTO
• Wait until all moving components have completely
stopped before getting off the tractor, connecting,
disconnecting, adjusting, cleaning, or servicing any
PTO driven equipment.
• Keep the PTO shaft cover in place at all times.
Replace the PTO shaft cap when the shaft is not in
use.
(A) "FAST"
(B) "SLOW"
(C) "LOCK"
13