Every 100 Hours; Lubricating Grease Fittings - Kubota M6S-111 Operator's Manual

EVERY 100 HOURS

EVERY 100 HOURS

1. Lubricating grease fittings

Apply a small amount of multipurpose grease to the
following points every 100 hours.
If you have been operating the machine in extremely
wet and muddy conditions, lubricate the grease fittings
more often.
(1) Grease fitting (front axle support)
(1) Grease fitting (front axle support)
(1) Grease fitting (front axle gear case support) - both sides, LH not
shown in illustration
M6S-111,M6L-111,M6H-101
(1) Grease fitting (top link)
(2) Grease fitting (top link bracket)
(3) Grease fitting (lifting rod)
(1) Battery terminals
(1) Grease fitting (steering joint shaft)
PERIODIC SERVICE
157