Hydraulic Unit; 3-Point Hitch Control System; Draft Stopper; Position Control - Kubota M6S-111 Operator's Manual

HYDRAULIC UNIT

HYDRAULIC UNIT
IMPORTANT :
• Do not operate until the engine is warmed up. If
operation is attempted when the engine is still
cold, the hydraulic system may be damaged.
• If noises are heard when implement is lifting
after the hydraulic control lever has been
activated, the hydraulic mechanism is not
adjusted properly. Unless corrected, the unit
will be damaged. Contact your KUBOTA Dealer
for adjustments.
A standard tractor has the following hydraulic control
systems. Choose the most appropriate system for the
implement you are using.

3-Point hitch control system

• Position control

• Draft control

• Mixed control
• Float control
Remote hydraulic control system
• Combined flow control
3-POINT HITCH CONTROL
SYSTEM
WARNING
To avoid personal injury or death:
• Before using the 3-point hitch controls, ensure
that no person or object is in the area
surrounding the implement or 3-point hitch. Do
not stand on or near the implement or between
the implement and tractor when operating the 3-
point hitch controls.

1. Draft stopper

To reduce the vibrations of attachments, set the draft
stopper to the "LOCK" position.
When using the draft control for plowing and similar
operations, set the draft stopper to the "UNLOCK"
position.
110
3-POINT HITCH CONTROL SYSTEM
(1) Draft stopper
2. Position control
This will control the working depth of the 3-point hitch
mounted implement regardless of the amount of pull
required.
(1) Position control lever
3. Draft control
This will control the pull of the 3-point implement.
As the load on the 3-point hitch changes due to various
soil conditions, the draft control system automatically
responds to these changes by either raising or lowering
the implement slightly to maintain a constant pull.
Place the position control lever in the lowest position
and set the implement pull with the draft control lever.
(A) "LOCK"
(B) "UNLOCK"
(A) "FLOAT"
(B) "DOWN"
(C) "UP"
M6S-111,M6L-111,M6H-101