EVERY 1500 HOURS
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
®
(1) DEF/AdBlue
lines
(2) Clamp bands
4. Replacing oil separator element
WARNING
To avoid personal injury or death:
• Be sure to stop the engine before replacing the
oil separator element.
1. Remove the cover and take out the element. Wipe
off the oil and the carbon from inside the case with
a clean rag.
2. Fit in a new oil separator element.
3. Tighten the cover.
M6S-111,M6L-111,M6H-101
M6S-111 and M6H-101
(1) Oil separator
M6L-111
(1) Oil separator
All models
(1) Body
(2) Oil separator element
(3) Gasket
(4) Cover
5. Checking positive crankcase
ventilation (PCV) valve
Consult your local KUBOTA Dealer for this service.
PERIODIC SERVICE
175