Rear Jack Point; Adjusting Fender Height - Kubota M6S-111 Operator's Manual

WHEEL ADJUSTMENT

2.1 Rear jack point

WARNING
To avoid personal injury or death:
• Before jacking up the tractor, park it on a firm
and level ground and chock the front wheels.
• Fix the front axle to keep it from pivoting.
• Select a jack that withstands the machine
weight and set it up as follows.
(1) Jack point

2.2 Adjusting fender height

Adjust the height of the fender according to the size of
the tire.
WARNING
To avoid personal injury or death:
• Support the tractor securely on stands before
removing a wheel.
• Do not work under any hydraulically supported
devices. They can settle, suddenly leak down,
or be accidentally lowered. If necessary to work
under the tractor or any machine elements for
servicing or adjustment, securely support them
with stands or suitable blocking beforehand.
1. Remove the rear wheels.
2. Remove the axle mounting bolts (M16). If adjusting
from upper position to lower position, remove the
adjusting plates as well.
3. Remove the fender mounting bolts (both M8 and
M10).
4. Change the position of the fender (right and left) to
the desired position, and reinstall the fender
mounting bolts (both M8 and M10), adjusting plates
(if reinstalling to upper position), and axle mounting
bolts (M16).
M6S-111,M6L-111,M6H-101
TIRES, WHEELS, AND BALLAST (M6L-111)
Tightening torque
M16 bolt 196 to 226 N⋅m / 20.0 to 23.0 kgf⋅m / 145 to
M10 bolt 48.1 to 55.9 N⋅m / 4.9 to 5.7 kgf⋅m / 35.5 to
M8 bolt 23.5 to 27.5 N⋅m / 2.4 to 2.8 kgf⋅m / 17.3 to
5. Reinstall the rear wheels.
(See Rear wheels on page 126.)
Tire size
16.9-24
600/50-22.5
18.4-26
Lower position
(1) Fender
(2) Axle mounting bolt (M16), lock washer, plain washer
(3) Fender mounting bolt (M10), plain washer
(4) Fender mounting bolt (M8), plain washer
Upper position
(1) Fender
(2) Axle mounting bolt (M16), lock washer, plain washer
(3) Fender mounting bolt (M10), plain washer
(4) Fender mounting bolt (M8), plain washer
(5) Adjusting plates
166 ft⋅lbs
41.2 ft⋅lbs
20.3 ft⋅lbs
Fender position
Lower position
Upper position
127