WHEEL ADJUSTMENT
3. Adjust the toe-in as 1 to 5 mm (0.04 to 0.2 in.).
(See Adjusting toe-in on page 162.)
(1) Front axle mounting bolt (both sides, LH not shown in illustra-
tion)
260 to 303 N
⋅ m / 26.5 to 31.0 kgf ⋅ m / 192 to 224 ft ⋅ lbs.
(2) Tie-rod mounting bolt (both sides, LH not shown in illustration)
61 to 71 N
⋅ m / 6.2 to 7.2 kgf ⋅ m / 44.8 to 52.1 ft ⋅ lbs.
(3) Tie-rod clamp (both sides, LH not shown in illustration)
M6S-111,M6L-111,M6H-101
TIRES, WHEELS, AND BALLAST (M6S-111)
(1) Extension 1 (short spacer)
(2) Extension 2 (long spacer)
(A) "TREAD"
IMPORTANT :
• When attaching the 12 front end weight
pieces on 2WD models, the front tread
1540 mm (60.6 in.)
1640 mm (64.6 in.)
1740 mm (68.5 in.)
1840 mm (72.4 in.)
1940 mm (76.4 in.)
2040 mm (80.3 in.)
117