Checking The Ccv Pressure Switch; Service Every 2 Years; Replacing The Fuel Grommet; Replacing The Dpf Differential Pressure Sensor Hose - Kubota L3302 Operator's Manual

PERIODIC SERVICE
11. Checking the CCV pressure
switch
1. Remove the pressure switch cover.
2. Check the terminals, pressure switch, and others.
3. If any damage or corrosion are found, do not use
the machine and consult your local Kubota Dealer
for repair request.
(1) Pressure switch cover

SERVICE EVERY 2 YEARS

1. Replacing the fuel grommet

Consult your local Kubota Dealer for replacing the fuel
grommet.
2. Replacing the DPF differential
pressure sensor hose
Consult your local Kubota Dealer for replacing the DPF
differential pressure sensor hose.

SERVICE EVERY 4 YEARS

1. Replacing the radiator hose (water
pipes)
See Checking the radiator hose and clamp on page
124 for this service.
1. Replace the radiator hoses and tighten the hose
clamps securely.
126
(2) CCV pressure switch
(1) Radiator hoses
(1) Radiator hoses

2. Replacing the fuel line

Consult your local Kubota Dealer for replacing the fuel
hose.

3. Replacing the intake air line

Consult your local Kubota Dealer for replacing the
intake-air line.
4. Replacing the oil cooler line [HST
type only]
Consult your local Kubota Dealer for replacing the oil-
cooler line.

5. Replacing the oil separator hose

Consult your local Kubota Dealer for replacing the oil-
separator hose.
SERVICE EVERY 1 YEAR
(2) Clamp bands
(2) Clamp bands
L3302,L3902