Adjusting Engine Valve Clearance; Every 1000 Hours Or 1 Year; Replacing Air Cleaner Primary Element And Secondary Element; Checking Exhaust Manifold - Kubota MX4800 Operator's Manual

86 PERIODIC SERVICE
(1) Check plug
(2) Filling plug
(3) Drain plug
BAdjusting Engine Valve Clearance
Consult your local KUBOTA Dealer for this service.

EVERY 1000 HOURS or 1 YEAR

Be sure to do the following servicing once every 1000
hours or yearly, whichever comes first.
BReplacing Air Cleaner Primary Element
and Secondary Element
(See "Cleaning Air Cleaner Primary Element" in "EVERY
100 HOURS" in "PERIODIC SERVICE" section.)
BChecking Exhaust Manifold
Consult your local KUBOTA Dealer for this service.

EVERY 1500 HOURS

BCleaning Fuel Injector Nozzle Tip
Consult your local KUBOTA Dealer for this service.
BReplacing Oil Separator Element
To avoid personal injury or death:
A Be sure to stop the engine before replacing the
oil separator element.
1. Remove the cover and take out the element. Wipe off
oil and the carbon in the case with a clean rag.
2. Fit a new oil separator element.
3. Tighten the cover.
(1) Oil separator
(2) Body
(3) Oil separator element
(4) Gasket
(5) Cover
BChecking PCV (Positive Crankcase
Ventilation) Valve
Consult your local KUBOTA Dealer for this service.
BChecking and Cleaning EGR Cooler
Consult your local KUBOTA Dealer for this service.