Electrical Specifications; Standard Ac Power Requirements And Consumption - Qualstar RLS-8350 Product Specification

Tape library

Hide thumbs Also See for RLS-8350:

Installation and operation manual (140 pages)

Technical & service manual (111 pages)

Table Of Contents

Table of Contents

4.1 Standard AC Power Requirements and Consumption

The RLS operates with the following alternating current power sources (Mains):

Rated

Line

Voltage

100–240 VAC

Table 4-1 Power Requirements

Other than selecting the appropriate AC power cord for connection to the mains, the

RLS requires no changes (switches, etc.) to operate from any input voltage within the

rated line voltage range.

Power consumption varies with the number of tape drives installed and the particular

operation being performed. All AC powered PSMs utilize Power Factor Corrected

(PFC) power supplies and thus the RLS' power factor is greater than 0.95 which

complies with CE requirement EN61000-3-2.

MODEL

RLS-8350

Table 4-2 Power Consumption

The idle power figures indicate the power consumed when the changer and tape drives

are idle. The peak power figures indicate the peak power consumed when the carriage

accelerates and the tape drives are active. The peak power levels are not expected to

last for more than two seconds at a time. The current drawn from the power line

(mains) is equal to the watts indicted in Table 4-2 divided by the AC voltage.

511002 Rev 07-01-19