Qualstar RLS-8350 Product Specification page 11

2.5.2.1 Control Panel
The control panel is a color LCD with touch screen. The operator may use the control
panel menus to configure and operate the RLS and monitor its status. The following
information can be displayed:
• Model number and all firmware revisions
• Extensive menu system for configuration, maintenance and operation
• Operational status (indicates all active cartridge movements)
• History log which stores the most recent commands and status
• Error conditions and diagnostic messages
• Library partition information
• Inventory information
2.5.2.2 I/O Port
The operator gains access to the media by unlocking the I/O port through either the
control panel or Q-Link and then manually extending the I/O port. When closed, the
I/O port is locked electronically. Once extended, four cartridges may be removed or
inserted. The library status may be configured to be "not ready" when the I/O port is
extended. Under this configuration, while the port is open, the RLS can respond to a
host interface command with a busy status, a not ready status or it can accept the
command and wait for port closure to complete the command.
Figure 2-2 The Four Slot I/O Port Extended
511002 Rev 07-01-19
Product Description 2-5