Connector Part Numbers - IONODES ATOMAS-DUO-HDMI User Manual

Table of Contents

Advertisement

5.2 Connector Part Numbers

ATOMAS-DUO-HDMI Carrier Board
o J1 – Ethernet & Power In / Hirose DF20F-30DP-1V(56)
o J2 – Comm, GPIO & Audio / Hirose DF20F-20DP-1V(56)
o J3 – B2B Connector for SOM
o J7 – Second Digital Video Interface / KEL USL00-30L
o J5 – HDMI Video Interface / KEL USL00-30L
o J6 – microHDMI Video Interface
o J8 – microSD Card Reader
o J10 – Analog Video Interface / Hirose DF20F-10DP-1V(56)
Note:
On the ATOMAS-DUO-HDMI Carrier Board, the second digital video interface (J7) and the analog
video interface (J10) cannot be used together at the same time. The user will have to choose the
active one via the encoder's web management interface (may or may not require a reboot).
Note:
On the ATOMAS-DUO-HDMI Carrier Board, the HDMI video interface (J5) and the microHDMI
video interface (J6) cannot be used together at the same time. The user will have to choose the
active one via the encoder's web management interface (may or may not require a reboot).
Note:
On the ATOMAS-DUO-HDMI Carrier Board the user can choose to have an optional PoE (Power-
over-Ethernet) module soldered onto the PCBA. Since this is done at the factory and the PoE
module cannot be removed or added later on, the user will need to explicitly specify it when
placing the order by selecting the appropriate option.
support@ionodes.com | www.ionodes.com
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ATOMAS-DUO-HDMI and is the answer not in the manual?

Table of Contents