Xerox FaxCentre F110 Service Manual page 178

General Procedures / Information
CURMOD Set-up Spain
The CURMOD port is activated before make within a set-up time and cleared after a set-up time
and make.
CURMOD Set-up France
The CURMOD port is handled using the inverted Pulse Dial port information.
CURMOD Set-up Portugal (International)
The CURMOD port is activated before the first break and kept active until the last make of the digit
is done. If several digits are dialled, the CURMOD stays active until the last make of the last digit
is done.
6-92
break make
PD
DMO_setup
CURMOD
PD
break make
CURMOD
DMO_on
DMO_setup
Figure 3
Figure 4
12/04 FaxCentre F110