Gp 9 Maintenance Functions - Xerox FaxCentre F110 Service Manual

GP 9 Maintenance Functions

In order to use the maintenance functions, the SOS_IMPTRA switch (SOS1-Bit8) has to be set to
1. Refer to GP 8.
Go to:
• Table 1 Initialization Functions
• Table 2 Other Functions
ITEM
Menu # 0
Menu # 1
Menu # 2
Menu # 3
Menu # 4
Menu # 5
Menu # 6
Menu # 7
Menu # 8
Menu # 9
FaxCentre F110
Table 1: Initialization Functions
ACTION
Default user parameters configuration (factory status) ‡ Restart with Easy
Install, GP 16.
Directory is preserved
Pages counters are preserved
Consumables counters are preserved
Communication log is preserved
Clear directory
Clear communication log
Clear pages counters (If page counter SOS26 / 6 is switched ON)
Clear consumables counters (Attention: after clear, Chip Card is needed)
Complete "hardware" reset : functions 0 + 1 + 2 + 3 + 8 ‡ Restart with Easy
Install GP 16. This command sequence is taken into account only if printer
cover is open
Same as Menu # 7 but without Easy Install
Functions 0 + 2 + 8 ‡ Restart with Easy Install
Directory is preserved
Pages counters are preserved
Consumables counters are preserved
Clear document memory (received documents, documents to be sent)
Clear Sending command list
Clear Printing command list
Directory is preserved
Pages counters are preserved
Consumables counters are preserved
Communication log is preserved
User parameters are preserved
Same as Menu # 7
GP 16.
GP 16.
12/04
General Procedures / Information
6-25