Table of Contents
Advertisement
4.
Press the ENTER-piston. A list with available Organ Settings appears on the
display.
Use the - and + pistons to select the Key Volumes function on the display.
5.
6.
Press the ENTER-piston. The sub-functions of the Key Volumes menu appear
on the display.
Use the - and + pistons to select the Reset one stop sub-function on the
7.
display.
8.
Press the ENTER-piston. A question to select a stop to reset appears on the
display.
9.
Activate one stop. A question to confirm appears on the display.
10. Use the - and + pistons to select No or Yes.
11. Press the ENTER-piston to confirm and to return to the Key Volumes menu.
12. Press the MENU pistons three times to exit the Johannus Menu.
c. Reset ALL stops
The Reset ALL stops function resets the key volumes of all stops to the factory
setting.
1.
Press the MENU-piston.
Use the - and + pistons to select the Organ Settings function on the
2.
display.
3.
Press the ENTER-piston. A list with available Organ Settings appears on the
display.
Use the - and + pistons to select the Key Volumes function on the
4.
display.
5.
Press the ENTER-piston. The sub-functions of the Key Volumes menu appear
on the display.
Use the - and + pistons to select the Reset ALL stops sub-function on
6.
the display.
7.
Press the ENTER-piston. A question to confirm appears on the display.
Use the - and + pistons to select No or Yes.
8.
9.
Press the ENTER-piston to confirm and to return to the Key Volumes menu.
10. Press the MENU-piston three times to exit the Johannus Menu.
5.5.6
MIDI Config
MIDI is a protocol for communication between the organ and other devices, such
as PC, Johannus MIDI Sequencer+ or other musical instruments.
The programmable MIDI stops allow you to control any module voice through any
MIDI channel (1-16).
The four parts of the programmable MIDI code are: Channel, MSB, LSB and Voice.
1.
Press the MENU-piston.
Use the - and + pistons to select the Organ Settings function on the
2.
display.
3.
Press the ENTER-piston. A list with available Organ Settings appears on the
display.
Use the - and + pistons to select the MIDI Config function on the
4.
display.
5.
Press the ENTER-piston. A question to select a MIDI stop to configure appears
on the display.
User Manual LiVE III AGO
34
Advertisement
Table of Contents
