Midi Config - Johannus Studio 370 User Manual

6. Use the - and + pistons to select the Reset one stop
function on the display.
7. Press the ENTER piston. A question to select a stop to
reset appears on the display.
8. Activate one stop.
9. The display requests confirmation. Use the - or +
pistons to select No or Yes.
10. Press the ENTER piston to confirm and to return to the
Key Volumes menu.
11. Press the MENU piston to return to the main menu.
12. Press the MENU piston to exit the Johannus Menu.
Reset ALL stops
The Reset ALL stops function resets the key volumes of all stops in one intonation
style to the factory setting.
1. Select an intonation style.
2. Press the MENU piston.
3. Use the - and + pistons to select the Key Volumes
function on the display.
4. Press the ENTER piston.
5. Use the - and + pistons to select the Reset ALL stops
function on the display.
6. Press the ENTER piston.
7. The display requests confirmation. Use the - and +
pistons to select No or Yes.
8. Press the ENTER piston to confirm and to return to the
Key Volumes menu.
9. Press the MENU piston to return to the main menu.
10. Press the MENU piston to exit the Johannus Menu.

4.11.7 MIDI Config

MIDI is a protocol for communication between the organ and other devices, such
as PC, Sequencer or other musical instruments.
The programmable MIDI stops allow you to control any module voice through any
MIDI channel (1-16).
The four parts of the programmable MIDI code are: Channel, Msb, Lsb en Voice.
1. Press the MENU piston.
User Manual Studio 370
Key Volumes
Reset one stop
Select a stop
to reset
Reset this stop?
No/Yes
Key Volumes
Reset one stop
Johannus Menu:
Key Volumes
Studio Mem: 1
Tr: 0/440 Exp:Sw
Johannus Menu:
Key Volumes
Key Volumes
Reset ALL stops
Reset ALL stops?
No/Yes
Key Volumes
Reset ALL stops
Johannus Menu:
Key Volumes
Studio Mem: 1
Tr: 0/440 Exp:Sw
26