Intonation - Johannus LiVE III AGO User Manual

5.5.4

Intonation

The Intonation function saves voice settings from the organ to an USB stick. This
requires a USB stick, with a storage size up to a maximum of 32 GB and pre-
formatted with the FAT32 file system.
a. Saving Intonation data from the organ
1. Press the MENU-piston.
Use the - and + pistons to select the Organ Settings function on the
2.
display.
3. Press the ENTER-piston. A list with available Organ Settings appears on the
display.
Use the - and + pistons to select the Intonation function on the display.
4.
5. Press the ENTER-piston. The Intonation menu appears on the display.
Use the - and + pistons to select the Save voicing function.
6.
7. Make sure the desired USB-stick, is inserted properly. It is recommended to
save the intonation data with written description (on the stick itself):
- to a separate USB-stick, with description of the sample set & version, or
- to save the data to the same original sample set stick that it belongs to. –
This will then be placed on the USB stick as a second intonation file, next to
the factory intonation data.
Press the ENTER-piston. When data is being sent, Busy... appears on the
8.
display.
It is possible that there is already a file present. You will be asked whether
or not the file should be overwritten. Use the - and + pistons to select the
function, then press the ENTER-piston to confirm.
Do not use the organ when the Busy... text is on the display.
9. If the data dump is complete, the Intonation menu appears on the
display. Note: Repeat (steps 5 – 9) for each ORGAN 1 – 5, if necessary.
10. Press the MENU-piston three times to exit the Johannus Menu.
b. Uploading intonation data to the organ
Make sure to upload only data files which are created with the same
instrument. Uploading a data file from another instrument may jeopardize
the functioning of your instrument.
1. Follow the steps 1 to 5 as above as described at a. Saving data from the
organ.
2. Use the - and + pistons to select the Load voicing function.
3. Make sure the desired USB-stick, is inserted properly.
4. Press the ENTER-piston. When data is being sent, the message Busy...
appears on the display.
5. If the data dump is complete, the Intonation menu appears on the display.
6. Press the MENU-piston three times to exit the Johannus Menu.
User Manual LiVE III AGO 32