Midi Config; Tuning - Johannus Vivaldi 15 User Manual

4.15.2 MIDI Config

MIDI is a protocol for communication between the organ and other
devices, such as:
PC
Sequencer
Other musical instruments
The programmable MIDI stops allow you to control any module voice (1-
128) through any MIDI channel (1-16).
1. Press the MENU piston. MIDI Program appears on the display.
2. Press the SET piston. MIDI: appears on the display.
3. Select the MIDI stop to be programmed (for example MIDI Swell).
MIDI: will be followed by the selected stop on the display.
4. Use the - and + pistons to select the desired MIDI channel (Ch:..).
5. Press the SET piston.
6. Use the - and + pistons to select the desired MIDI voice number
(Vc:..).
7. Press the SET piston. The selected adjustments are now stored in
memory.
8. Select another MIDI stop to be programmed, if desired.
9. Press the MENU piston to return to the main menu.
10. Press the MENU piston again to exit the Easy Menu.

4.15.3 Tuning

The Tuning Mode function shifts the pitch in fourteen steps of 1 Hz (from
426 Hz to 454 Hz). The set pitch can be read on the display.
Programming the Tuning Mode
9. Press the MENU piston.
10. Use the - and + pistons to select the Tuning function on the display.
11. Press the SET piston. The display shows the current tuning settings
(Adjust Tune: ...Hz).
12. Use the - and + pistons to select the desired pitch.
13. Press the SET piston. The selected settings are stored in the memory
and you return to the main menu automatically.
14. Press the MENU piston to exit the Easy Menu.
22