Table of Contents
Advertisement
MIDI Specifications
This paragraph describes the specifications on the MIDI Implementation Chart in
more detail.
Default basic channels (transmitted/recognized)
7:
Pedal
8:
Manual I
9:
Manual II
10:
Manual III
16:
Accessories
Basic channel changes (transmitted)
Can be programmed through the MIDI Config. See § 5.5.5 MIDI Config.
Control changes (transmitted)
Controller 7 (07h)
Controller 11 (0Bh)
Controller 6 (06h)
Control changes (recognized)
Controller 7 (07h)
Controller 11 (0Bh)
Program changes (transmitted/recognized)
Organ stops: Depends on the number of stops and the sequence of stops.
MIDI stops (programmable): 1-128. See § 5.5.5 MIDI Config.
System exclusive messages (transmitted/recognized)
Each 'sys ex' (system exclusive) message largely looks the same. The first 7 bytes
and the last byte are always the same. Only the value of the 8th byte varies. This
is the 'sys ex message' that Johannus generally uses: F0 00 4A 4F 48 41 53 XX F7
(hexadecimal). The 'sys ex messages' described below only indicates the value of
the 8th byte (XX) and the output from which it is transmitted.
User Manual LiVE III AGO
General volume, with volume values 40 (28h) –
127 (7Fh).
Swell pedal, with volume values 55 (37h) – 127
(7Fh).
Fine Tune, with Fine Tune values 33 (21h) - 95 (5Fh).
Fine Tune value 64 (40h) = A = 0 cents.
The following applies to the Fine Tune:
LSB 100 (64h) 1 (01h) and the MSB 101 (65h) 0(00h).
Transposer, with transposer values 56 (38h) - 72 (48h).
Transposer value 64 (40h) = A = center.
The following applies to the transposer:
LSB 100 (64h) 2 (02H) and the MSB 101 (65h) 0(00h).
General volume, with volume values 0 (00h) –
127 (7Fh). Volume values less than 40 (28h) are treated
as 40 (28h).
Swell pedal, with volume values 0 (00h) – 127
(7Fh). Volume values less than 55 (37h) are treated as
55 (37h).
44
Advertisement
Table of Contents
