Table of Contents
Advertisement
Use the - and + pistons to select the Reset ALL stops sub function on
5.
the display.
6.
Press the SET piston. A question to confirm appears on the display.
Use the - and + pistons to select No or Yes.
7.
8.
Press the SET piston to confirm and to return to the Key Volumes menu.
9.
Press the MENU piston 2x to exit the Johannus Menu.
5.7
MIDI Config
MIDI is a protocol for communication between the organ and other devices, such as PC,
Johannus Sequencer+ or other musical instruments.
The programmable MIDI stops allow you to control any module voice through any MIDI
channel (1-16).
The four parts of the programmable MIDI code are: Channel, Msb, Lsb en Voice.
1.
Press the MENU piston.
Use the - and + pistons to select the MIDI Config function on the
2.
display.
3.
Press the SET function. A question to select a MIDI stop to configure appears
on the display.
4.
Activate the MIDI stop which has to be configured. The settings of the
corresponding MIDI stop appear on the display. An pointer is located in front
of the value of the MIDI channel.
5.
Use the - and + pistons to select the desired MIDI channel.
6.
Press the SET piston. The pointer jumps to the MSB value.
7.
Use the - and + pistons to select the desired MSB value.
8.
Press the SET piston. The pointer jumps to the LSB value.
9.
Use the - and + pistons to select the desired LSB value.
10. Press the SET piston. The pointer jumps to the Voice value.
11. Use the - and + pistons to select the desired Voice value.
12. Press the SET piston. The selected configuration is now stored in memory.
The pointer jumps back to the MIDI channel location.
13. Press the MENU piston 2x to exit the Johannus Menu.
5.8
Orchestrals
The Orchestral menu is only available if the organ is equipped with the
optional Solo or Ultimate Voice Package.
With the optional Solo or Ultimate Voice Package the organ is enlarged with a number of solo-
and orchestral voices.
Solo- and orchestral voices are standard playable from a factory defined manual. This can be
changed via the Johannus Menu.
Accessing the settings of a solo- or orchestral voice can also be done with
the Quick Access function. See
User Manual Ecclesia T-270 / T-370 / D-470 / D-570
Orchestral settings.
§ 4.12.3
26
Hide quick links:
Advertisement
Table of Contents
