Table of Contents
Advertisement
6.
Use the – and the + pistons to select the function.
When Rear Speakers are not used, or not connected, the best sound quality
can be obtained by Rear Speakers 0% (Off).
Do connect, do not use internal connections for external speakers by
yourself. Refer all servicing to your retailer, or Global Organ Group B.V.
7. Press the ENTER-piston. The pointer jumps to the set level.
8. Use the - and + pistons to select the desired selection.
9. Press the ENTER-piston to confirm and to return to the Rear Speakers menu.
10. Press the MENU piston three times to exit the Johannus Menu.
5.6.7
Side Speakers Level
The System Settings function Side Speakers Level determines the volume level of
the Surround Loudspeakers at startup of the organ.
1.
Press the MENU piston.
Use the - and + pistons to select the System Settings function on the
2.
display.
3.
Press the ENTER-piston. A list with available System Settings appears on the
display.
Use the - and + pistons to select the Side Speakers Level function
4.
on the display.
5.
Press the ENTER-piston. The current settings for the left and the right side
speaker appear on the display.
6.
Use the - and + pistons to select the side of which the level has to be
changed.
7.
Press the ENTER-piston. The pointer jumps to the set level.
8.
Use the - and + pistons to select the desired level (0-100%).
9.
Press the ENTER-piston to confirm and to return to the Side Speakers Level
menu.
For a proper balance of the Surround sound it is advisable to keep both
sides on an equal level. Use only unequal levels to correct different volumes
caused by, for example, reflective surfaces on one side of the organ.
10. Press the MENU piston three times to exit the Johannus Menu.
5.6.8
Stop Numbers
This System Settings function 'Stop Numbers' determines if the Stop Numbers will
be updated automaticaly on the a small dynamic displays, when a sampleset is
selected with sample bank pistons (Organ 1 - 5). The appropriate stoplist names of
the selected organ (1 – 5) will be visible on the small dynamic displays above each
stop individually, see also 4.5.1.
When desired, it is possible to change the individual register stop position. These
can be exchanged / swapped (together with the correct stop list names), using
Johannus Intonat software.
User Manual LiVE III AGO
39
Advertisement
Table of Contents
