Maintenance
Maintenance task
Check the function of the swiveling
unit and quick-change adapter (replace
the "pre-assembled plate" articulated
connector – see wear parts) (> See ch.
Replacing Articulated Connectors)
Check that all the connections are se-
cure, e.g. the screws, hose clamps, etc.
Check the legibility of the type plate
and clean it if necessary.
The operating instructions are avail-
able, legible, and can be accessed by
personnel.
Check the general condition of the de-
vice.
10.3 Cleaning the Gripper
1. For cleaning, do not use aggressive cleaning agents such as industrial alcohol, white spirit or thin-
ners. Only use cleaning agents with pH 7–12.
2. Remove dirt on the exterior of the device with a soft cloth and soap suds at a maximum tempera-
ture of 60° C. Make sure that the silencer is not soaked in soapy water.
3. Ensure that no moisture can reach the electrical connection or other electrical components.
28 / 36
Daily
Weekly
Monthly
Every six
months
X
X
X
EN-US · 30.30.01.02459 · 00 · 08/20
Yearly
X
X