Table of Contents
Advertisement
2.6 Personal Protective Equipment
To avoid injury, always use appropriate protective equipment that is suitable for the situation. The protec-
tive equipment must meet the following standards:
•
Protective work shoes in safety class S1 or higher
•
Sturdy work gloves in safety category 2133 or higher
•
Industrial helmet
•
Ear protection class L or higher
•
Eye protection class F
•
Hair net
•
Closely fitting clothing
2.7 Technical Condition
If the product is operated while in a defective state, safety and function will be impaired.
•
Only operate the gripper when in perfect working order as originally delivered.
•
Follow the maintenance schedule.
•
Use only original spare parts from Schmalz.
•
If the operating behavior changes, check the gripper for faults. Rectify faults immediately!
•
Do not independently modify or alter the gripper.
•
Safety features must not be disabled under any circumstances.
Schmalz assumes no liability for consequences of modifications over which it has no control.
2.8 Responsibility of the Integrator
The integrator is obligated to perform a risk assessment for the environmental conditions at the installa-
tion location.
The integrator is also responsible for third parties in the working area of the gripper. The operating com-
pany must ensure that they have the appropriate qualifications and skills.
•
Ensure that regular breaks are taken.
•
Ensure that the gripper cannot be started up by unauthorized persons.
•
During maintenance or repair work, ensure that the gripper cannot be operated.
•
Clearly define the responsibilities for the various activities performed with the gripper.
•
Ensure that these responsibilities are observed.
•
When handling unfamiliar loads, carry out tests where necessary to ensure safe operation:
– The load is sufficiently rigid that it cannot be damaged during handling.
2.9 Country-Specific Regulations for the Operating Company
1. Observe the country-specific regulations regarding accident prevention, safety testing and environ-
mental protection.
2. The gripper is to be used in combination with an automated handling system (gantry/robot). Ensure
that the appropriate country-specific regulations and safety regulations are adhered to.
EN-US · 30.30.01.02459 · 00 · 08/20
Fundamental Safety Instructions
9 / 36
Advertisement
Table of Contents
