Hitachi ZW 120-6 Operator's Manual page 200

Load and Carrying Method
d
WARNING:
 Be sure to provide tire stopper (1) in front of the
dumping port.
 Before raising the lift arm, slightly tilt the bucket
back and forth to stabilize the load in the bucket to
avoid personal injury or damage to the machine due
to falling of the load.
Avoid raising the lift arm on a slope.
 When approaching the machine to the dumping port
with the lift arm raised to a high enough position,
never operate steering wheel. Slowly drive the
machine. Never rapidly operate the machine to
prevent turning over accident.
A wheel loader performs work process of loading, carrying,
and dumping in sequence. Generally, when the carrying
distance is 30 to 100 m, this method is employed.
Make an upgrade slope of approx. 3° around a hopper when
dumping into the hopper. Be sure to provide a level area 10
m apart from the dumping port and tire stopper (1) at the
dumping port edge. Automatic reduction in travel speed
will assist operator's braking operation effort.
OPERATING MACHINE
5-14
1
M4GB-05-014