Hazard Switch - Hitachi ZW 120-6 Operator's Manual

Hazard Switch

IMPORTANT: Do not hold hazard switch (1) in the "
position for a long time with the engine stopped. The
batteries will become discharged.
When a machine failure occurs, use this switch to inform other
vehicles that the machine is in an emergency situation.
When the position marked with "
pressed, front and rear turn signals (hazard light) (2) on both
right and left sides start flashing.
Press the opposite side of hazard switch (1) to turn the hazard
signals (2) OFF.
OPERATOR'S STATION
"
" on hazard switch (1) is
1-49
1
2
2
MNDB-01-002
1
M4GB-01-065
2
MNSC-01-010
2
MNSC-01-032