Loading / Unloading On Trailer - Hitachi ZW 120-6 Operator's Manual

Loading / Unloading on Trailer

d
WARNING: Be sure to use a loading dock or a ramp for
loading/unloading.
Always load and unload the machine on a firm, level surface.
Ramp/Loading Dock:
1. Before loading, thoroughly clean the ramps, loading
dock and flatbed. Dirty ramps, loading docks, and
flatbeds with oil, mud, or ice on them are slippery and
dangerous.
2. Place blocks (1) against the truck and trailer wheels while
using a ramp or loading dock.
3. Ramps must be sufficient in width, length, and strength.
Be sure that the incline of the ramp is less than 15°.
4. Loading docks must be sufficient in width and strength
to support the machine and have an incline of less than
15 °.
TRANSPORTING
10 to 15 °
6-2
1 1
M4GB-06-001
M4GB-06-002