High-Low Beam Switch; Key Switch - Hitachi ZW 120-6 Operator's Manual

High-Low Beam Switch

Shifts the direction of the headlight beam high and low.
d
CAUTION: Travel the machine with the headlight in
the low beam position when other vehicles are present
in the vicinity.
By bringing down signal lever (7) with the headlight ON, the
headlight beam turns upward, and high beam indicator (8)
comes ON. By bringing up signal lever (7), the headlight beam
turns downward, and high beam indicator (8) goes OFF.

Key Switch

d
WARNING:
 Before starting the engine, return the forward/
reverse lever to neutral (N), apply the parking brake,
lock the neutral lever lock, and lock the control lever.
Refer to the descriptions in the OPERATING ENGINE
section for the detail information.
 Never turn key switch (9) OFF while traveling the
machine. Failure to do so will result in steering wheel
and brake pedal to be inoperable.
1- OFF (Engine Off )
2- ACC (Radio)
3- ON (Power ON)
4- START (Engine Start)
OPERATOR'S STATION
1-46
7
8
2
3
1
9
9
MNDB-01-003
MPTC-01-019
4
MNDB-01-053