Axle Oil Change Interval Hour Meter - Hitachi ZW 120-6 Operator's Manual

Axle Oil Change Interval Hour Meter

Oil change intervals can be reset to "2000.0", "1500.0", or
"1000.0". The interval set when the machine was shipped
from the factory is "2000.0".
While displaying the change interval hours, keep pressing
switch (1).
f
NOTE: When switch (1) is released, time resetting is
completed. Keep pressing switch (1) until the desired resetting
time is displayed.
Time display is changed four seconds after pressing switch
(1). While keeping switch (1) pressed, press switch (3). Each
time switch (3) is pressed, the displayed hours will change in
the order of "2000.0  1500.0  1000.0". When the desired
time is displayed, release switch (1) to complete resetting
operation.
OPERATOR'S STATION
1-39
3 2 1
Remaining hours
before replacement
Alternate display
is displayed.
Keep pressing switch (1).
Time display is changed four
seconds after pressing switch (1).
Press button (3)
Press button (3)
Press button (3)
Release switch (1) to complete resetting operation.
MPTC-01-019
MNDB-01-051