Machine - Hitachi ZW 120-6 Operator's Manual

1. Connecting the booster batteries
1.1 Stop the engine on the booster battery mounted

machine.

1.2 Connect one end of red booster cable (1) to the
positive (+) terminal of the machine battery, and the
other end to the positive (+) terminal of the booster
battery.
1.3 Connect one end of black booster cable (2) to the
negative (-) terminal of the booster batteries, and then
connect the grounding bolt (3) on the chassis. In the
last connection to the bracket, sparks may fly so keep
the machine batteries as far away as possible from the
bracket.
1.4 After securely connecting the booster cables, start the
engine on the booster battery mounted machine.
1.5 Start the engine on the machine.
1.6 After the engine starts, disconnect booster cables (1
and 2) in the following steps.
2. Disconnecting the booster cables
2.1 Disconnect black negative (-) cable (2) from grounding
bolt (3) first.
2.2 Disconnect the other end of black booster cable (2)
from the negative terminal of the booster batteries.
2.3 Disconnect one end of red booster cable (1) from the
positive terminal of the booster battery.
2.4 Disconnect the other end of red booster cable (1) from
the positive terminal of the machine battery.
OPERATING ENGINE
3-10
MNSC-03-004