Siemens SITRANS LG200 Series Instruction Manual page 75

Operating Mode (Lvl only)
Default: Run. Compensate = Auto. Select from Run, Calibrate, Off; Superuser password
required.
7ML1305-1 Correction
Default: 0.0. Distance in mm from reference to user reference point (7ML1305-1 probe
characteristic); Superuser password required.
Electronics Temperature (Elec Temp)
Present temperature in electronics compartment (degrees Celsius)
Maximum Temperature (Max Temp)
Maximum electronics temperature recorded.
Minimum Temperature (Min Temp)
Minimum electronics temperature recorded.
Safety Zone Hysteresis (Sz Hyst)
Default: 1.0 in. Safety Zone Hysteresis height; Superuser password required.
7ML19985KA02
(factory authorized personnel only) 1
(factory authorized personnel only)
(factory authorized personnel only)
(factory authorized personnel only)
SITRANS LG200 – INSTRUCTION MANUAL
(factory authorized personnel only)
(factory authorized personnel only)
Page 71