Table of Contents
Advertisement
BYPASS PREPARATION
Tape off and scuff the aft inside portion of
the bypass
Apply (3) coats of BVM Heat Shield to the
inside of the bypass.
Note: A heat gun can be used to speed up
the drying process in between coats.
Install the bypass, Turbine and tailpipe.
TURBINE INSTALLATION
Sight down the tailpipe to ensure the turbine is
centered
Mark the location of the turbine mounting holes
and use your favorite mounting hardware.
NOTE: Our Demo Model use's 4 SHCS and washer
for mounting.
BVM ® 2019
Ultra Bandit EVO
Assembly & Operation Manual
14
11/12/2019
Advertisement
Table of Contents
Need help?
Do you have a question about the GO FLY GOLD and is the answer not in the manual?
Questions and answers