Mounting The Ez Hanger; Mounting The Tanks - BVM GO FLY GOLD Assembly And Operating Manual

MOUNTING THE EZ HANGER

The EZ Hanger is mounted to the
tank using 2 #4 counter sunk wood
screws. The tank has 2 predrilled
holes where it mounts.
NOTE: There are 2 longer 4-40 bolts
that come with the EZ Hanger. These
will get used in the next step.
Once the EZ Hanger is on the
tank, remove the 4-40 bolt from
the collar. Using your Dremel
make a slot on the inside of the
tank, use the longer 4-40 bolt to
extend through the side of the
tank and into the collar. This is
what will remove your tank.

MOUNTING THE TANKS

Using the cardstock supplied cut out the card tool
to fit around the carbon flex plate. Tape the
template to the wing. Using the drill sizes on the
template drill the wing accordingly.
BVM ® 2019
Ultra Bandit EVO
Assembly & Operation Manual
7 11/12/2019