Installation - LEGRAND 4 226 81 Installation And User Manual

14. Installation

• The automatic transfer switch is designed with IP40 protection.
• Insert the device into the panel hole,
• From inside the panel, for each four of the fixing clips, position the clip in its square hole on the housing side, then move
it backwards in order to position the hook.
Fig. 37 - Mounting
• Repeat the same operation for the four clips.
• Tighten the fixing screw with a maximum torque of 0,5Nm.
• In case it is necessary to dismount the system, unloose the screws.
• For the electrical connection see the Legrand wiring diagrams.
34