The Quick Lube HF is a single scissor lift with a lifting capacity of 9000 pounds. The lift features a powerful 4.0hp motor and hard-chromed cylinder sets.
5.2. Safety Devices Nussbaum has designed several safety features into each lift to ensure safe and efficient operations under a variety of conditions. Warranties will be voided, and dangerous working conditions exist if any of the listed devices are altered or disabled.
Position the high-density blocks under the pick-up points of the vehicle as described by the vehicle manufacturer. If the platforms are positioned too wide apart to contact a specific vehicle’s lifting points, use the Quick Lube HF arms to reach the lifting points instead.
Inspection, repair, and maintenance must be performed by a certified Nussbaum technician who has been trained on the lift they are servicing. They must be able to make proper judgment on the repair or maintenance that needs performed to ensure full safety, operational reliability, and structural integrity during the lifetime of the lift.
ONLY USE REPLACEMENT PARTS THAT ARE PROVIDED BY OR RECOMMEND BY NUSSBAUM AUTOMOTIVE SOLUTIONS CONTACT TECHNICAL SERVICE ABOUT REPLACEMENT PARTS Quick Lube HF Nussbaum Automotive Solutions, LP | 1932 Jordache Court, Gastonia, NC 28052 | 704.864.2470 | Email: info@nussbaum-usa.com www.nussbaum-usa.com...
Allow at least 10’ from the inside of the door to the rear of the platform. 11.4. Concrete Foundation for Flush Mounting the Lift If flush mounting the Quick Lube HF, follow foundation plans in Appendix 4 during pouring of concrete floor. If not flush mounting, ignore this section. LIFT INSTALLATION 12.1.
If there are gaps between the frame and the floor, those areas in which the load of the lift is passed to the base frame must be filled with high strength grout. Quick Lube HF Nussbaum Automotive Solutions, LP | 1932 Jordache Court, Gastonia, NC 28052 | 704.864.2470 | Email: info@nussbaum-usa.com www.nussbaum-usa.com...
Need help?
Do you have a question about the Quick Lube HF and is the answer not in the manual?
Questions and answers