Companion Programming; Registration - Norstar Modular ICS 5.0 Companion Installer's Manual

Companion programming

Companion programming is found under the System
programming heading. It includes the following subheadings:

Registration

You must enable registration for the entire Norstar system to
allow individual portables to register.
The options are Yes (Y) and No (N).
• Yes indicates that Registration is enabled.
• No is the default and indicates that Registration is not
enabled.
Use ­ and CHANGE to enable or disable registration.
Press CREDITS (U.S. only) to view the credits available.
P0941568 01
Software Keys are required to activate
wireless capabilities (U.S. only).
To take advantage of the wireless capabilities
available to your Norstar system, you must first
enable a certain number of portable credits using
Software Keys purchased through Nortel
Networks. Keys are obtained and entered into the
system by the installer. For more detailed
information on enabling Norstar Companion,
refer to the Software keys (U.S. only) on page 64.
Registration should normally be disabled.
For security reasons, and to prevent
unauthorized users from being registered to your
system, set registration to
finished registering the portables.
Programming / 57
N
when you have
Modular ICS 5.0 Companion Installer Guide