Steelcase Answer Manual page 7

®
6.
Connect the power cord from the
display monitor to the electrical box that
is factory installed in the Monitor Mount
assembly.
NOTE: An adaptor may be required to
make the connection to the IEC C13
receptacle in the electrical box.
7.
Lift the display monitor into position and
engage protruding hooks on mounting
brackets into mounting pattern slots on the
pan assembly.
The hooks will go in, then down passively
locking into the openings. Ensure proper
engagement before letting go of the display.
8.
Plug the power cord into a receptacle.
7
7
6
8
Page 7 of 24
25393001 Rev A