Steelcase Answer Manual page 4

®
1.
Determine the desired elevation for
mounting the unit on the 30" wide Answer
panel.
2.
Position the Monitor Mount assembly
onto the 30" wide Answer panel at the
desired height.
Engage the integral hooks on the pan into
slots on the Answer junction posts, with an
"in and down" motion (2a).
Tip: Audible clicks provide feedback the
anti-dislodgement features are engaged.
Check to ensure the clips have engaged
and are now flush to the surface of the
mounting pan (2b).
As a final check, pull up firmly to check
and confirm full engagement (2c).
3.
Field cut the pass through opening in
the skin behind Monitor Mount assembly
anywhere within the large
center opening.
Note: The electrical box assembly can be
located in various orientations using hole
patterns provided in the pan around the
center opening. This may be necessary
to avoid interference to obstacles within
the panel such as a structural horizontal
beam or cable tray.
Tip: Cut the opening big enough to reach
through for ease of routing cords and
cables.
FOLD HERE
3
! C L
I C K
!
2b
2a
! C L
I C K
!
1
2c
Page 4 of 24
25393001 Rev A