Summary of Contents for Altronix AL1024X220 Series
Page 1
AL1024X220 Series Power Supply/Charger Models Include: AL1024X220 - Single Output. AL1024XPD4220 AL1024XPD4CB220 - Four (4) Fuse Protected Outputs. - Four (4) PTC Protected Outputs. AL1024XPD8220 AL1024XPD8CB220 - Eight (8) Fuse Protected Outputs. - Eight (8) PTC Protected Outputs. AL1024XPD16220 AL1024XPD16CB220 - Sixteen (16) Fuse Protected Outputs.
Page 2
Overview: Altronix AL1024X220 is a power supply that converts a nominal 220VAC (working range 198VAC-256VAC) 50/60Hz input to a 24VDC regulating output (see specifications). AL1024X220 is a base unit for a series of multi-output power supply/chargers including: AL1024XPD4220, AL1024XPD4CB220, AL1024XPD8220, AL1024XPD8CB220, AL1024XPD16220, AL1024XPD16CB220 (Refer to AL1024X220 Series Power Supply Configuration Reference Chart below).
Page 3
4 years or less if needed. Optional Rechargeable Optional Rechargeable Stand-by Battery Stand-by Battery CAUTION: Optional rechargeable stand-by batteries must match the power supply output voltage setting. Keep power-limited wiring separate from non power-limited. Use minimum 0.25" spacing. AL1024X220 Series Installation Guide - 3 -...
Page 4
Fig. 1 - AL1024X220 Series CAUTION: De-energize unit prior to servicing. For continued protection against risk of electric shock and fire hazard replace fuse with the same type and rating. Do not expose to rain or moisture. Earth Ground non power-limited...
Page 5
Stand-by battery connections. Maximum charge current 3.6A. Power Distribution Module Terminal Legend Function/Description PD4/PD4CB PD8/PD8CB 1P to 4P 1P to 8P Positive DC power outputs. 1N to 4N 1N to 8N Negative DC power outputs. AL1024X220 Series Installation Guide - 5 -...
Page 6
COMMON POWER OUTPUTS DC Output to devices From Power Supply DC Output to devices From Power Supply 1P-8P Power Outputs, Board 1P-8P Power Outputs, Board 1N-8N Common Outputs (Factory Installed) 1N-8N Common Outputs (Factory Installed) - 6 - AL1024X220 Series Installation Guide...
Page 7
I*1.8 (safety factor) ________________ AH Note: AL1024X220 series power supply is designed to work with batteries up to 65AH. Please note: line [I] must not exceeds 36AH. You have to reduce either stand-by current consumption or stand-by time in order to comply with requirement.
Page 8
1.5” 4.615” (117.2mm) 4.615” (117.2mm) (38.1mm) (38.1mm) Altronix is not responsible for any typographical errors. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty IIAL1024X220 Series...
Need help?
Do you have a question about the AL1024X220 Series and is the answer not in the manual?
Questions and answers